» MAKE: NOISE — Discuss this article

Showing messages 1 through 6 of 6.

• Hardware programmer prices
  You must be logged in to reply.
  
  
  The article seems to contradict itself -- in the pro/con section, it says a hardware programmer is about $200. But in the step-by-step, they're using a USB hardware programmer that costs $35. Are they talking about the same thing?

  Posted by sprad on December 26, 2005 at 13:25:22 Pacific Time

• Re-using microprocessors
  You must be logged in to reply.
  
  
  Something else the article didn't mention -- can microprocessors be re-used? Or are they like CD-Rs, where you can only write once?

  Posted by sprad on December 26, 2005 at 13:27:06 Pacific Time

• This created a stir in me, but...
  You must be logged in to reply.
  
  
  This article got me so excited about making smart (or smarter) devices using the PIC microcontrollers. It had been in the back of my mind to explore these chips for a while but simply didn't have the time. This article was a nice introduction to their use. However, I felt that there were many inconsistencies in the article that led to some confusion for me.
  
  Firstly there was the price inconsistency mentioned in a previous post. Also, the Stamp modules were brought up in the comparison box, but barely mentioned otherwise in the article. Why list more pros for an item that then is not really addressed in the article? The comparison box made it seem that it would have been better to use the Stamp modules.
  
  The author writes in another side bar that s/he is using open source tools for programming the chips in *nix, but then continues to describe the process with the Windows IDE.
  
  Although the sample code was written in BASIC, the open source tools that were referenced in the sidebar do not offer a BASIC compiler as far as I could tell, just a PIC assembler. How was the BASIC code being compiled?
  
  Page 161 has 3 photos numbered 1, 2, and 3, but they do not correspond to points 1, 2, and 3 in the text. As far as I could tell, the 3 photos are actually 3 different PIC programmers to which nothing in the text refers.
  
  It would have helped if there were URLs for the resources mentioned in this article. Sure, it wasn't too hard to google everything, but it seemed sloppy that an article that introduced a technology offered no resources.
  
  I LOVE this magazine, but this article felt like it had been overlooked by the editors and left me frustrated.
  

  Posted by henryXchung on January 16, 2006 at 07:50:52 Pacific Time

• Awesome Article
  You must be logged in to reply.
  
  
  I've always wanted to "play-around" with MCUs since my days at engineering school. However, there is something that still confuses me and even intimidates me...
  
  In the circuit diagram, several components are used like resistors and capacitors. Resistors I can understand, they are used to avoid "short circuits", when the state of an output pin changes. And capacitors, well that's kind of dark for me, but I've read they are used to "compensate" for "fluctuations" in voltage. But this is my main concern/problem:
  How do I know which values to use? from 4.7 ohms to 4,700 ohms? from .1 uF to 10 F?
  
  I think (if it hasn't been addressed in any of the previous MAKE issues) this would make a super interesting article.
  And if it has been addressed before, can someone point me to it? Online references/resources?
  
  Thanks for the great article, it makes my subscription worthwhile!
  

  Posted by lagonz on February 11, 2006 at 18:47:36 Pacific Time

• 4KHz oscillator
  You must be logged in to reply.
  
  
  I am having trouble finding this part at places like Radio Shack and Mouser.com, is a 4KHz crystal oscillator a fairly common part? Most crystal oscillators seem to be in the MHz range.

  Posted by fxer on March 01, 2006 at 16:37:09 Pacific Time

• Desperately Seeking Advice
  You must be logged in to reply.
  
  
  Can someone help me ? I am a filmmaker looking to display my videos on flat screens but I would like the videos to be triggered to play when someone walks by the screen. I'm not quite sure what is entailed, presumably some sort of motion sensor and the obvious LCDs are required ? I'd like to find the most cost effective way of producing this effect ?

  Posted by Lauren V on March 24, 2008 at 12:11:51 Pacific Time