» MAKE: NOISE — Discuss this article

Showing messages 1 through 4 of 4.

• How to do in PAL?
  You must be logged in to reply.
  
  
  This looks really cool, but I'm from Germany. How would you build this for PAL?

  Posted by scotty74065 on June 26, 2008 at 05:40:59 Pacific Time

• Diode missing from components list?
  You must be logged in to reply.
  
  
  I've got this project put together on the breadboard but I'm not getting video output. In troubleshooting I noticed a resistor and diode on pin 21 of the processor on the schematic but it is not displayed in any of the pictures. Which one is right? Also if we should be using a diode, which diode?
  
  Thanks!
  
  epk

  Posted by electronicpresskit on August 06, 2008 at 17:34:02 Pacific Time

• Diode missing from components list?
  You must be logged in to reply.
  
  
  Hi, yes there is a resistor and diode (of the light emitting variety) that act as a power light for the unit. Check out this photo, which shows the LED attached to some ribbon cable. As you note this isn't pictured on the breadboard, but is pictured on the perfboard.
  
  
  
  If you're having trouble with the video out, try going to the simple trv out the TV example included with the Propeller IDE. Start there and get it working with their code and pins, once that's confirmed move onto the PM3K schematic and code. Also check the parallax forums, they're active and helpful:
  
  http://forums.parallax.com/forums/default.aspx?f=25

  Posted by tarikh on August 07, 2008 at 21:47:38 Pacific Time

• Diode missing from components list?
  You must be logged in to reply.
  
  
  they scrubbed the flickr photo i tried to post. Let me try again here:
  
  http://flickr.com/photos/tarikh/2743529672/sizes/l/
  

  Posted by tarikh on August 07, 2008 at 21:48:40 Pacific Time