Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

141E2D8A58A78C8480Bfb955.Large
CheeseDuck writes – “Make a real blowgun from parts readily available in most homes!”Link.

Phillip Torrone

Editor at large – Make magazine. Creative director – Adafruit Industries, contributing editor – Popular Science. Previously: Founded – Hack-a-Day, how-to editor – Engadget, Director of product development – Fallon Worldwide, Technology Director – Braincraft.


Related

Comments

  1. novabeatnik says:

    I used to make blowguns from 3/8ths pvc and the darts from pins stuck through plastic valve stem caps from bicycle tubes .you can ask the other kids in the neighborhood it worked really well,(well not for johnny)

  2. novabeatnik says:

    I used to make blowguns from 3/8ths pvc and the darts from pins stuck through plastic valve stem caps from bicycle tubes .you can ask the other kids in the neighborhood it worked really well,(well not for johnny)

  3. NickCarter says:

    I used those plastic round caps (for cap guns) fitted to a pin as shown, and blown through a straw. I really am sorry for prematurely ageing my mother.

  4. SamHa1n says:

    Rigid wire cut at an angle for point, then heated and melted into plastic beads worked great for me.

  5. Ryan says:

    i make blowguns with rolled up magazine paper and darts with magazines and tooth picks at the tip

In the Maker Shed