Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Exposing.Sized
Bob posted up a follow up to the previous PCB post – his photo resist PCB process – “Don’t be scared away with this method. It’s easy! The only thing I do different is I use regular ordinary fluorescent lights ($8.00 at WalMart for a small fixture with bulb). Exposure times go from 90 seconds to 10 minutes but it works just the same. I don’t have much in the way of descriptions but I have pictures of every step I use here”Link.

Phillip Torrone

Editor at large – Make magazine. Creative director – Adafruit Industries, contributing editor – Popular Science. Previously: Founded – Hack-a-Day, how-to editor – Engadget, Director of product development – Fallon Worldwide, Technology Director – Braincraft.


Related

Comments

  1. dstrcto says:

    Nice walkthrough, I was wondering what the deets were on this.

    The regular fixtures are cheap, but sometimes you can find the 24″ blacklights (with a bulb) from walmart for only $10. I have one laying around.

In the Maker Shed