Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

184445262 012742367C
Check it out, TheThompsonFive made the workbench from our “weekend projects” video podcast! – Link.

Related:
Make Podcast: Weekend Projects – Make a Workbench – Link.

Phillip Torrone

Editor at large – Make magazine. Creative director – Adafruit Industries, contributing editor – Popular Science. Previously: Founded – Hack-a-Day, how-to editor – Engadget, Director of product development – Fallon Worldwide, Technology Director – Braincraft.


Related

Comments

  1. CT_Gator00 says:

    I too made this fine bench over the weekend. It’s really solid and the design is top notch!
    There is so little lumber left over – it’s really cool.
    I found a can of stain/urethane at the local “lots” store for $3 so now it has a nice finish on the top

    Thanks for the design!!

  2. CT_Gator00 says:

    I too made this fine bench over the weekend. It’s really solid and the design is top notch!
    There is so little lumber left over – it’s really cool.
    I found a can of stain/urethane at the local “lots” store for $3 so now it has a nice finish on the top

    Thanks for the design!!

  3. Kirk_von_Rohr says:

    Fantastic!
    One quick addition that might become usefull is to put a cross brace along the backside. If you find over time that is starts to get a little wobbly from side to side, the diagonal cross brace will help. Best of luck making stuff on it!