DIY Burglar alarm – Auto shut off tone generator

Technology
DIY Burglar alarm – Auto shut off tone generator

Tonegenerator
Here’s a pretty simple burglar alarm you can make and toss in your car/desk drawer/whatever, it uses the handy dandy 555 timer chip… – “In this auto shut off tone generator project, once the switch to the 9V power supply is connected, the alarm will trigger at a frequency of approximately 1.27 kHz. It will remain ON for a duration of approximately 170 seconds or 2.8 minutes before it stopped. This is a typical home burglar alarm system of which once the alarm is triggered ON, it will not be shut OFF until the duration of time set has elapsed. This project is useful when built as one can carry it along wherever one goes or placed it in a vehicle. In times of emergency, one can easily switched ON the switch and the loud speaker will emit a loud sound that will frighten the uninvited guest.”Link.

Related:

  • Electronics projects @ MAKE – Link.
  • 555 timer projects @ MAKE – Link.
  • 555 timer projects from the pages of MAKE – Link.

2 thoughts on “DIY Burglar alarm – Auto shut off tone generator

  1. Melfredy Asamjawa says:

    is it possible for us to adjust the value of R3,R4 and C1 so that the output frequency sound will be inaudible for human? for example 17kHz and above…

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

current: @adafruit - previous: MAKE, popular science, hackaday, engadget, fallon, braincraft ... howtoons, 2600...

View more articles by Phillip Torrone

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK