Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Img 1866
Img 1862
If you have an iPhone and watch long movies (usually from ripped DVDs) leaving the phone in the dock doesn’t cut it, the iPhone needs to be horizontal. I usually have CNN, ABC or a few hours of news on my phone and like to leave it on my desk while I work but you can’t watch these in the dock since it’s turned the wrong way. Long plane / train trips with a tray made me want to make this too.

So – here’s an iPhone stand I made, you can take the file to a place like TechShop in SF or anywhere there’s a high powered laser that can cut acrylic. Believe it or not there are lots of these lasers in most cities, definitely at a lot of campuses now too. Universal and Epilog are usually the only two brands you’ll come across.

I figured this is a good beginner project for getting starting with your own little “FabLab” like project. Variations on this model will work with other phones too, all depends on the size and dimensions of your phone of course.

I made this stand as a snap-to-together / press fit and it can be reproduced cheap, if anyone designs a better version send me the file and I’ll post it up here on MAKE. I put a hole on each leg so the USB cable could fit through, it seems to be a better way to hold the sync/power cable.

Here we go… Get some acrylic, I bought a sheet of 12″ x 12″ clear acrylic (1/8th” thickness). You can get these sheets at local plastic stores in most big cities or online – Link (McMaster-Carr $6.48). Cast (not extruded) tends to be more scratch resistant and better for projects like this.

Download this file, it’s an Adobe Illustrator file (black and white vector line art, included are other formats if needed) – Link (ZIP with AI//CDR/DXF). If you want to make a lot of these just copy and past the 2 shapes over and over.

Corel1
Open this file in your laser cutting application, I use an Epilog mini and use Corel Draw. The artwork is just “hairline” if you modify the template make sure to specific the hairline line setting, this is how the laser knows to vector cut as opposed to just etching.

Set the area of the work to 12″ x 12″ and place the art where you plan to cut. You can fill the sheet for just do one.

Corel2
Settings – the settings for a 35W Epilog mini are 12% speed, 100% power and 5000Hz. Consult your laser manual for the specific settings for the laser you’re using.

Fire! Cut your shapes!

Img 1853
Img 1850
Img 1854
Img 1857

Pop the parts out and snap together your new iPhone stand!

Corel3
Corel4
Img 1871
Add a logo if you want, just make sure to change the settings so the laser cuts and etches.

From here you could make a ton of them and give them away, or try out that new site “Ponoko” which allows you to have someone laser cut your stuff out (It doesn’t appear to be accepting new accounts at this time, so try back later and report your results). Next up I might make a headphone wrap / holder, or combine that with the stand, stay tuned!

Phillip Torrone

Editor at large – Make magazine. Creative director – Adafruit Industries, contributing editor – Popular Science. Previously: Founded – Hack-a-Day, how-to editor – Engadget, Director of product development – Fallon Worldwide, Technology Director – Braincraft.


Related

Comments

  1. cheesy says:

    How many people have laser cutters?!

    You need an article on how to create a laser cutter first…

  2. philliptorrone says:

    @chessy— “you can take the file to a place like TechShop in SF or anywhere there’s a high powered laser that can cut acrylic. Believe it or not there are lots of these lasers in most cities, definitely at a lot of campuses now too. Universal and Epilog are usually the only two brands you’ll come across.”

  3. eightlines says:

    I agree with cheesy, there’s a lot of laser cutter articles lately — yes, I’d like one, no, I wouldn’t like to pay for it. Looking at the form of the holder above, wouldn’t it be easier to make one of these out of an expired tape dispenser? or picture frame holder?

  4. earthrobot says:

    Assuming these stands are relatively inexpensive, you should fab several and sell them in the Make store.

  5. lungfish says:

    Phil, did you find that changing the frequency had an impact on the vector cuts? I haven’t cut that much acrylic (I’ve mostly done paperboard & wood) but it hasn’t seemed to make much of a difference for me.

    Man, Techshop really needs a messageboard for this kind of stuff.

  6. orkspace says:

    Anyone selling these? I’d buy one.

  7. Pretty Amazed says:

    Wow. Hey, I’m pretty amazed

  8. Ralph says:

    If you go to amazon.com and type in iPhone stand or iPhone cradle you will find something like this for sale. Look for the iPhone with futurama on it.

  9. KipM says:

    OK, how do I find the closest lasercutter that I can submit a job to? I have been looking for job shops for this for a long time.

  10. JeffDM says:

    KipM; You might ask Epilog or Universal Laser Systems to provide you a name for a nearby shop. Failing that, I happen to own a laser engraver that’s similar (different brand). I might be able to help, if you’re willing to deal remotely, email a drawing and getting the parts through the mail. You can try to email me at jeff at demaagd dot com.

  11. Phil says:

    Just looked on Amazon as suggested above and indeed someone is selling exactly the same thing – I would be onto this company like a rash if they have stolen your idea!!!!! = $7.95 as well

  12. Phillip Torrone says:

    @Phil – it’s open source i gave it away, anyone can do whatever they want and make money on it. hope it works out for them :)

  13. Matt says:

    would you be able to emailing a blueprint for this? i work at a sheetmetal shop and wouldn’t mind trying to make it with aluminum.