Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Brian writes…


The XO Laptop comes with the drivers you need to talk to an Arduino board, but you need to do a few things before you can run the Arduino environment. Once you get it running, though, it works just fine. The first step is to install Java. To install Java on the XO Laptop, check out these instructions (the version of Java that you download will be different from what’s listed on that page, so you’ll need to modify the commands slightly to take that into account).

Once you’ve got Java up and running, you need to install the GNU C and C++ compilers as well as the LIBC for the AVR chip that the Arduino uses. To do this, open up the Terminal activity, su to root, and install avr-gcc, avr-libc, and avr-gcc-c++ using yum:

$ su
# yum install avr-gcc avr-libc avr-gcc-c++

While you’re root, you may as well make one of the changes you need to make; add the olpc user to the lock and uucp groups. To do this, edit the /etc/group file with the /usr/sbin/vigr command and add the olpc user to the end of the lock group:


and to the end of the uucp group:


After you exit vigr (which is just a script that starts vi to safely edit the group file), decline its offer to edit the gshadow file, and type exit to get back to a normal (non-root) shell):

# /usr/sbin/vigr
You are using shadow groups on this system.
Would you like to edit /etc/gshadow now [y/n]? n
# exit

Next, make sure you’re in your home directory, download Arduino (there may be a more recent version of it, so check the Arduino page to be sure. Extract Arduino in your home directory (you’ll be running it out of your home directory as well):

$ cd
$ wget
$ tar xvfz arduino-0010-linux.tgz

Now, you’re all Arduino-fied. To run it, cd to the arduino-0010 and run the arduino script:

$ cd ~/arduino-0010
$ ./arduino

There is one last trick: you’ll likely find that the Arduino user interface misbehaves quite a bit. To get it to work right, press the screen rotate button four times to get a nice 360 degree rotation. Arduino will redraw and start behaving itself as shown in the screenshot.

Update: As Seth points out in the comments, the Update.1 build that is coming out this month will do away with the su command, so you should use sudo -s instead of su (or simply prefix each superuser command with sudo).

Update 2: If you use JRE 5 from the Java technology archive instead of JRE 6, you won’t need to use the screen rotation trick.

Phillip Torrone

Editor at large – Make magazine. Creative director – Adafruit Industries, contributing editor – Popular Science. Previously: Founded – Hack-a-Day, how-to editor – Engadget, Director of product development – Fallon Worldwide, Technology Director – Braincraft.

blog comments powered by Disqus

Featured Products from the MakerShed