Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Helmer1-1024X768
Janne writes about – Helmer, a linux cluster in a IKEA Helmer cabinet…

3D computer rendering are very CPU intensive and the best way so speed up slow render problems, are usually to distribute them on to more computers. Render farms are usually very large, expensive and run using ALLOT of energy. I wanted to build something that could be put in my home, not make too much noise and run using very little energy… and be dirt cheep, big problem? :) no computer stuff cost almost nothing these days, it just a matter of finding fun stuff to play with.

I wanted to use Intel Quad core 65 nm or better. I surfed the web and found 6 of then at a good price. Then I looked after the cheapest motherboard that could run these. The result of my investigation was the Gigabyte S-series GA-G33M-DS2R/S2 card.

The most amazing is that this machine just cost as a better standard PC, but has 24 cores that run each at 2.4 Ghz, a total of 48GB ram, and just need 400W of power!! This means that it hardly gets warm, and make less noise then my desktop pc.

Render jobs that took all night, now gets done in 10-12 min.

Phillip Torrone

Editor at large – Make magazine. Creative director – Adafruit Industries, contributing editor – Popular Science. Previously: Founded – Hack-a-Day, how-to editor – Engadget, Director of product development – Fallon Worldwide, Technology Director – Braincraft.


Related
blog comments powered by Disqus