Enclosure tips

Technology
Enclosure tips

Enclosurehelp

Sparkfun has a some helpful tips for casing up electronics projects – good tips for board and switch mounting specifically.

One thing to keep in mind during all of this: as in all things, there will be a lot of back and forth when you find a box that you think might work, then something else interferes (ie, the height of your power jack). Keep your patience near by because it’ll be easier to work through the numbers now as apposed to later when you have a box in hand with a few holes in it and your unit wont fit.

Boxing it up

4 thoughts on “Enclosure tips

  1. Anony Moose says:

    I am a big advocate of good old fashioned hand tools. Put away the Dremel — for working in plastic, it’s more trouble than it’s worth. I have seen many projects on the internet that have been butchered with a Dremel that would have been far better if executed with a little patience and skill with hand tools.

    A good start is a mixture of different files (different cuts, sizes and profiles), a hack saw and a coping saw.

    Using the rectangular switch cut-out as an example:

    1. Mark the cut-out with something that will give a crisp, clean line. Use a ruler to mark straight lines.

    2. Use a drill to drill out the corners, and shown in the article. Leave some extra meat between the edge of the holes, and your lines. It’s easy to file material away. It’s impossible to put it back.

    3. Use a coping saw, or broken hacksaw blade to cut the straights. Again, stay within the lines.

    4. Carefully file the remaining material away.

    It takes more time, but the process is more satisfying than using a screaming Dremel with a grabby cutter, and bathing in ABS or polystyrene fumes. You will also be impressed with the results.

  2. Collin Cunningham says:

    Thank you – that sounds like an excellent alternative.
    Somehow I never acquired a coping saw – now I must!

Comments are closed.

Discuss this article with the rest of the community on our Discord server!

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK