Build: Kinetic Horse Sculpture

Build: Kinetic Horse Sculpture


James Watt, the creator of the Solar Theremin, has another great kit that I am going to making for this weeks build. This time it’s a kinetic horse made of paper. The final horse is able to gallop, thanks to a small hidden motor inside.

This kit is a fairly easy build, but it does take a while to complete. I am not going to be documenting every step of the process this time. Why? Well, how many pictures do you really want to see of me cutting and gluing paper?

You can purchase the Kinetic Horse Kit on the Clockwork Robot website.

What you get:

IMG_3575.JPG

Almost all the parts are supplied with the kit. The CD contains the patterns which can be printed on (10) pieces of card stock, and the directions, which I just read from my computer as I assembled.

What you need:

  • Glue – White glue is perfect
  • X-Acto Knife – Be careful when cutting!
  • Screwdriver – small
  • (10) Pages of Paper – Any heavy card stock will do
  • (2) pliers – For bending wire
  • (1) AA battery
  • (1) Small ruler or straight edge

Step1: Let The Cutting & Folding Begin

IMG_3576.JPG

There are a lot of parts to cut and fold. I decided to cut all mine out first. Remember to keep the parts you cut with the original paper it was printed on. The piece numbers are printed on it and some parts are very similar. Use some kind of straight edge to help fold straight lines.
Step 2: Making the legs

IMG_3583.JPG

Making the legs is not too difficult, but there are 4 of them to make. Take your time and it isn’t a problem. Make sure to allow time for the glue to dry. I switched between the parts to allow one to dry while I worked on another. In some areas it helped to have a small screw driver to help push the paper down while the glue dries.

IMG_3585.JPG

All 4 legs are done and I am going to let them dry over night.

Step 3: Making the gearbox

IMG_3595.JPG

Once again, this is really easy and the directions are very clear. All you have to do is insert the gears as pictured and snap it together.

Step 4: Building the body

IMG_3605.JPG

Again, follow the instructions. Cut, glue, cut, glue…etc.

IMG_3608.JPG

A few more pieces and the head is done!

Step 5: Bending the drive wire

IMG_3602.JPG

Make sure to hold the wire with (2) pairs of pliers. The directions show you exactly how to bend the wire. When you are done, just slip on a pair of legs on each side.

Step 6: Adding the power

IMG_3614.JPG

The kit comes with a (1) AA batter pack, but I wanted more power. I decided to go through my parts bin and I found a nice little battery case that holds (2) AA batteries. This should make the horse really gallop! Also, the battery case has an on/off switch, which is a nice addition. I mounted it all to the bottom of the horse with double-sided tape so it is less visible.

Step 7: Testing

IMG_3617.JPG

Make sure everything is turning smoothly. If it is hanging up anywhere, just push, pull, or bend it into shape. I had very little problems with mine, just a small adjustment here and there.

Extra: What, no tail?
The horse didn’t have a tail, so I added one. If you got this far, it shouldn’t be a problem to cut one out and attach it to the back-end of the horse.

This was a fun project, and I really like the results. You can buy one on the Clockwork Robot website.

16 thoughts on “Build: Kinetic Horse Sculpture

  1. James Watt says:

    I love the tail. With a little more modification you could probably get it to swish about too. :)

    1. Marc de Vinck says:

      @Jim

      Sounds like you have V 2.0 to work on…..”Now with swishing tail!”

  2. s. says:

    Purchase kit, build from supplied parts?
    Make is going down the drain.

    If you published the sheets, then it would be a DIY project. What you show is “Some assembly required” project.

    1. Marc de Vinck says:

      @s.

      Yep, this is an “assembly project” but it is made by a “Maker” in the UK (Thanks Jim) and I like his kits. We try to mix up kit builds with original builds. Our audience ranges from people afraid of scissors, to hard-core builders of DIY stuff that is way over most peoples heads.

      I have a few builds coming up that will be 100%, OK, maybe 85%, original…hopefully you like them more.

  3. drain says:

    i agree about make going down the drain. most of the magazine now covers stuff on the blog which is taken from other blogs… etc. not much in the way of original content. buy the kit, buy the kit, blah blah. the podcasts suck now too – shoulda left olde dirty kip kay at that trashy site they found him on. they are super uninformative, have no energy, and a lot of the time dont work correctly. not to mention radio shack commercials in the middle and the ultra lame intro/editing…. biff.

    btw… this horse appears to be cantering as opposed to galloping.

  4. Anonymous says:

    If you adjust the crank shaft so it at 12 and 3 o’clock as opposed to 12 and 6 you can get more of a gallop. I like the canter though.

    The last clockworkrobot kit Make did a Build blog on (solar theremin) actually did have all the information you need to make the thing. Full labeled schematics.

    Also several people have managed to make kinetic horses just by watching the videos:

    http://www.youtube.com/watch?v=0kllh2yV4i0

  5. Mario says:

    Hello.
    Is there enough space between the body and the legs of the horse to make the cable go form the top to the bottom? Or did you need to make any modifications?

    Thanks!

    1. Marc de Vinck says:

      Nope, there is just enough wire.

  6. Anonymous says:

    it’s really hard to make a horse kinetic… you should be expert or you should have patience in your hands if it goes wrong:)

  7. John Robinson says:

    I can see no one has commented on here for a long long time, but I work for Glasgow Science Centre and was wondering if its possible to make this alot larger at least 5-6 times bigger and out of mdf/plywood

    1. jim watt says:

      hi john, it’s been a year, sorry I just hadn’t read the comments but if there’s still any interest, do get in touch. I’m a regular at the MAKllab (Jim Watt) and if they allow emails in this: clockworkrobot at gmail dot com
      Hope to hear from you.

  8. papiertigre says:

    i can’t buy the set on the website anymore…. where else to get it? help!

  9. Laura Natalia says:

    hola como puedo conseguir los moldes para el cuerpo del caballo y como hago el movimiento de la cabeza???

  10. papiertigre says:

    Yes it would be helpful to get at least the the printing forms of the horse.
    I need that set !!

  11. Brian Stokes says:

    Just discovered this artist and his kit. His website is down and there does not appear to be any replacement. Do you happen to know if he’s still active as an artist?

    1. TestShoot says:

      excellent question, i have the horse kit but lost the CDrom instructions :/

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK