Designed to fit on a breadboard, Ikalogic’s frequency meter uses “only 3 components and 8 resistors” including an ATmega16 –
This article shows how to build a small, cheap and simple frequency meter, without any fancy, out of reach components. The simple proposed design can measure frequencies up to 40 Mhz with errors below 1%! This degree of precision will be more than enough to debug most of your analog and digital circuits, and will give you the ability to analyze many aspects that you were unable to see before.
6 thoughts on “HOW TO – Build a frequency meter”
Comments are closed.
ADVERTISEMENT
Join Make: Community Today
1% of 40MHz is 400kHz, and that’s really huge. Imagine 10ml of black ink in a liter of milk, and that’s 1% contamination. Anyway, as somebody who has worked in the field, 1% error is unacceptable. Now, this is definitely a cool and fun project, but it is not useful for any kind of real work.
You realize the description says below 1 percent. It could be 0.1 or even 0.001 percent. So you could use this in industrial applications
good point – for increased precision, the author suggests using an external timing crystal.