Home-brewed iPod tube amp and speakers for Xmas

Music Technology
Home-brewed iPod tube amp and speakers for Xmas
tubeAmp012509_1.jpg
tuneAmp012609_2.jpg

Peter Redmer, of Caffeinated Pixels, is one happy little wirehead. For Christmas this year, his dad, an electrical engineer, built him a tube amp and a set of speakers for his iPod. Here’s dad on the specs:

Amplifier: In order to keep the design small, I am using a hybrid design for the amplifier. A push-pull driver using a OP275 dual opamp is used to drive a pair of 5902 output tubes for each channel. A small amount of negative feedback is employed to control distortion and level the frequency response. The amplifier produces about 1.25 watts per channel. The overall gain of the amplifier is set to be used with the output from a portable MP3 player. The volume control on the MP3 player is used to set the output level.

Speakers: The system also needed a pair of small speakers to go along with the amplifier. A two inch full range driver was available from HiVi. I put the numbers into BassBox Pro and worked out a design. I ended up with a ported box of about .035cubic feet in size. The speakers have a low frequency point of about 120HZ. They sound much better than most desktop computer setups. A subwoofer would be a great addition, but that’s a project for another day!

One cannot underestimate the value of a thoughtfully handmade gift like this, whether hi-tech or low. My wife had a dulcimer that her father made for her one year when she was a teen. She cherished that thing more than just about any other possession. You can tell how thrilled Peter is by his father’s gift.

One of these days, I swear I’m going to break down and build a tube amp like this myself. Has anyone here built a small amp like this for portable audio?

My Homebrew Vacuum Tube iPod Stereo Amplifier and Speakers

6 thoughts on “Home-brewed iPod tube amp and speakers for Xmas

  1. Chad Lovelace says:

    i have goofed around with quite a few tube amps but never built from scratch!!! man this is i nice one

    on another note this would be really cool for a write up in the diy music section of make mag!!!

    nice post and thanks im gonna check this out !!

    Chad

  2. Peter R says:

    Thank you for your kind comments everyone. Also, thanks to Gareth and MAKE for picking this one up. I hope everyone enjoys looking at it as much as I enjoy listening to it ;)

  3. NonEngineerDad says:

    Very cool! I love seeing this stuff. Thank you.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

Gareth Branwyn is a freelance writer and the former Editorial Director of Maker Media. He is the author or editor of over a dozen books on technology, DIY, and geek culture. He is currently a contributor to Boing Boing, Wink Books, and Wink Fun. His free weekly-ish maker tips newsletter can be found at garstipsandtools.com.

View more articles by Gareth Branwyn

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK