Stepper motor idea sources

Robotics Technology
Stepper motor idea sources
a-small-stepper-motor.jpg

Photo from Society of Robots

Dale Herzog and I were talking the other night about the treasure trove of techno goodies that can be found in the average dumpscore printer. He sent along a few resources including this one about using steppers and the Basic Stamp:

If you are staring at a pile of stepper motors in a surplus shop, or have pulled one out of used equipment, here’s how you can determine what you have.

First, check for the number of wires coming out. If 5 or 6 or 8, that’s good because you have a unipolar stepper. If 4, that’s bad because you have a bipolar stepper and should put it back. If 2, you have a regular DC motor. Confirm you have a stepper motor by turning the shaft. You should feel the little detents indicating each step.

Next, read the label on the side. If you are lucky, it will have the voltage and step size printed, or will be in a bin with the voltage marked. Look for 12V steppers. If you have a 5V stepper, and it is large, the currents will probably be too large for easy control. Small 5V steppers are OK. If you have no way of telling the voltage, it is probably best to look for another stepper.

What are you doing with steppers? How are you controlling them?

2 thoughts on “Stepper motor idea sources

  1. svofski says:

    Bipolar steppers are very easy to control if you dig yourself out of your 1980’s bunker full of ULN2803’s and look around for stepper driver chips. I’m using Allegro A3984 in my current project. It’s as easy as it gets.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

Making things is the best way to learn about our world.

View more articles by Chris Connors

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK