How to CNC a Subwoofer Enclosure for Your Car

CNC & Machining Craft & Design Digital Fabrication Music
How to CNC a Subwoofer Enclosure for Your Car
painted
Photography by Luke Hamilton

Most kids make tables, chairs, or boxes for their woodshop class. Instead of that, New Zealander Luke Hamilton decided that for his senior class project, he’d prefer to design and CNC a subwoofer enclosure for his car’s stereo system. Feeling that most car subs were too flashy and tacky for his taste, he was inspired to make something sleek, practical, and totally custom.

cncsub2

In order to achieve the curved design of the enclosure, he used Sketchup to create a model which he then sliced into flat layers. Underneath the main cavity is another empty area. Hamilton explains, “The port allows air to flow in and out as the subwoofer is playing. From the research I did the channel the air flows down should be a smooth as possible, plus where it exits it should be flared. As the air is flowing so fast any sharp edges will make unwanted noise. You can do a bunch of calculations to get this all right but I was just sticking to basic principles. Thankfully there was virtually zero port noise.”

Once the model was set, he exported these individual pieces — about 60 of them — and set the parameters (how deep, how fast, and at what speed the spindle would work) using a program called Cambam.

cncsub4

Hamilton had never used a CNC machine and had to learn the basics. He used a Craftsman 900ST, which he says “had some issues constantly crashing mid-run, and it seemed that the hard drive was being affected due to the vibration.” Thankfully he was still able to cut the pieces he needed from 18mm MDF (and probably learned some bonus CNC problem-solving skills from that cranky machine). He sanded the fresh cuts and then glued the pieces together, first into three smaller sections, and then gluing these all together.

clamps

In order to perfectly align the pieces, he made a simple jig which he covered with masking tape to shield it from the glue. Next he used a router to round out the edges of the front and rear panels and sanded off the excess glue.

Although he decided to paint the MDF, Hamilton says that the paint job has gotten scratched up from being in his trunk. “After using it for a month or so, I’m very much considering sanding it back to bare MDF as it shows off the way it was built, and bumps and scratches won’t really matter anymore.” If he were to paint MDF again though, Hamilton says Reddit user swolebrah advised that since MDF is “very thirsty,” it’s more efficient to thin down glue with water, brush it on, then sand and paint on top of that instead of blowing through can after can of primer.

Once it was painted and ready to go, Hamilton installed the sub and secured the enclosure to his trunk with velcro strips. Nice job, Luke! We hope you got full marks.

What was the most exciting thing you made in high school shop class? Let us know in the comments below.

[via Reddit]

2 thoughts on “How to CNC a Subwoofer Enclosure for Your Car

  1. WingDQ says:

    If you’re going to be building bass speaker enclosures, may as well start with expert designed plans: http://billfitzmaurice.net/ They most likely will put out better bass for the same size of whatever you can design yourself.

  2. Aristarco Palacios says:

    Did they confuse the subwoofer enclosure with an explosive device and arrested him, or not? That’s the question!
    Use the (CNC) Force, Luke!!

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

Sophia is the managing editor of the Make: blog. When she’s not greasing editorial gears, she likes to run, ride, climb, and lift things, and make lo-tech goods like zines, desserts, and altered clothing. @sophiuhcamille

View more articles by Sophia Smith

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK