Here’s a simple helping hand upgrade that makes soldering wires to potentiometers and switches tons easier. Just replace one of the alligator clips with a squeeze style “wide mouth” clip. Here’s one from mouser.com that will work.
2 thoughts on “Helping hand upgrade”
Comments are closed.
ADVERTISEMENT
Support Make:
Join Make: Community Today
Join Make: Community Today
Years ago I welded hemostats to the ball from the last segment of the helping hands. It was much nicer to use. I knew that it would stay clamped once it was locked down. I had to epoxy the base to a six inch square piece of steel plate to handle the extra weight without tipping over. Other than that there were not problems. I also like that they can be used as heat sinks. I can clamp a part with one side, and clamp the other side on as a heat sink while soldering.