Arduino based DMX controller: Kohtauskone

Arduino
Arduino based DMX controller: Kohtauskone
29092009982.jpg

Jari sent in this Arduino mini based DMX strobe light controller. There is plenty of room for expansion and customization, which is good since you can control almost any DMX device with this type of hardware,

This one is a small project that I had to do twice to get right. It is a pedal used for controlling strobe light through DMX protocol. Technically it is built on top of a Pro Mini Arduino with simple DMX driver circuit. It has button to kick the action, rotating switch for choosing different presets and one switch for future expansion. You could basically control any DMX device with this hardware, but I built it for Stairville 1500DMX strobe light.

In the Maker Shed:
Makershedsmall
Arduinomini
Arduino Mini Board, fully assembled

Discuss this article with the rest of the community on our Discord server!

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK