How-To: Install a ball valve on a cooler

4 thoughts on “How-To: Install a ball valve on a cooler”

1. Mike says:

   October 2nd, 2009 at 11:25 am

   Installing a valve in a cooler is generally done to create an insulated mash tun.

   Much additional info about converting a cooler to a mash tun can be found here: http://www.homebrewtalk.com/wiki/index.php/Converting_a_cooler_to_a_mash_tun

   An by the way, a nice example of a diy wort chiller can be seen here: http://www.homebrewtalk.com/f51/my-new-wort-chilling-station-73900/

2. datianvalve says:

   November 19th, 2013 at 12:01 am

   DATIAN VALVE CO., PROFESSIONAL VALVE MANUFACTURER IN CHINA.

Comments are closed.