Reverse engineering old printers

Technology

During their weekly Take Apart Tuesday, the fine folks at the Crash Space hackerspace in LA were planning to convert an old printer into a pen plotter, by disabling the original electronics and hooking directly to the stepper motors that controlled the print head. Unfortunately, things became more difficult when the discovered that the printer actually used a DC motor and optical encoder instead of stepper motors. Fear not, they eventually figured out how to control it, but not before smoking a potentiometer, and causing some other mischief. Their project write-up has an interesting discussion about why the DC motor might have been chosen over a stepper, and the issues involved in driving them directly.

2 thoughts on “Reverse engineering old printers

  1. DanYHKim says:

    Back in the old days when a Polymerase Chain Reaction thermocycler cost a lot of money, I read about how one could be made from a dot-matrix printer.

    For my comment on this, see:

    http://www.bio.net/bionet/mm/methods/2000-February/080730.html

    Printers used to come with a book detailing the codes needed to make the printhead engage/disengage, advance the paper feed one notch, roll the printhead back and forth, etc. Very useful information that’s harder to come by.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK