Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

3-stage.jpgCraig Smith wrote in with a brush-cleaning setup he created:

Did you know:

(1) Most people buy the cheap disposable paint brushes because they don’t want to clean the expensive one-coat brush, or have been burned before by losing an expensive brush to improper cleaning.

(2) Most people clean a brush poorly in a one soak paint thinner process, leaving lots of paint residue in the brush, therefore ruining it.

(3) Most people pour a cup of paint thinner in a jar, clean the brush (poorly) and dump the thinner.

I made a 3-stage paint thinner jar/rack system that eliminates all of this. The top board has 4″ circles cut out of it with a circle cutting bit, the bottom board has 3-3/4″ holes so the jars cannot fall through. Four dowels glued in hold the rack together. The jars should be filled no more than 1/3 full. After several weeks of sitting, the oil based paints will fall out/settle on the bottom of the jars. The now clear thinner can be carefully poured into a container, the settled paint sludge cleaned out of the jars, and the thinner poured back in. One quart of paint thinner will last me dozens of brush cleanings with excellent results, minimal waste and I’m now buying the high quality paint brushes for superior results to use them over and over.

John Baichtal

My interests include writing, electronics, RPGs, scifi, hackers & hackerspaces, 3D printing, building sets & toys. @johnbaichtal nerdage.net


Related
blog comments powered by Disqus

Featured Products from the MakerShed

Follow

Get every new post delivered to your Inbox.

Join 25,441 other followers