Robot Build: Using an L293 motor controller

Robotics
Robot Build: Using an L293 motor controller

MZ_Jameco-RobotBuild-1.gif

l293Ddiagram.jpg

In the latest Make: Robot Build Newsletter, Matt Mets wrote a piece introducing motor controllers and linked to an ITP article on using an L293NE motor controller. In the Robot Build area of the MAKE Forums, Alan Kilian pointed us to this other excellent tutorial, Control Your Motors with L293D, on Let’s Make Robots. It has very clear breadboard images and shows you, among other things, how to add a few capacitors to your circuit to smooth out the current.

Control your motors with L293D

More:

8 thoughts on “Robot Build: Using an L293 motor controller

  1. mightywombat.livejournal.com says:

    I have an interesting conundrum in which the motors that drive my gearbox (the ones that came with it) are 1.5-3V, and my MCU requires 5V. I’m going to be using a MintyBoost to drive 3V up to 5, and a separate 3V source for the motors. I’m just hoping that using a 5V signal to activate my H-bridge to run 3V to the motors doesn’t cause a problem. I can’t remember the math for transistors, but I’m pretty sure that having a higher voltage at the base than at the collector should just throw it all wide open. Guess we’ll see.

  2. pete says:

    Look at the datasheet for the transistors in your H-bridge. Look for Vbe(sat) Aka Voltage, base to emitter. It will usually be 0.7v. So you will have to be at least that much higher in base voltage.

  3. dennisj says:

    I’ve had better success with the L298N. I kept burning up L293’s.

    Also, I have some PD control code for both of these drivers here:

    http://subzonepen.blogspot.com/2009/06/dc-motor-closed-loop-pd-control-code.html

  4. Anonymous says:

    clicking on the link above “using an L293NE motor controller” shows lots of php internals which i presume is unintentional…

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

Gareth Branwyn is a freelance writer and the former Editorial Director of Maker Media. He is the author or editor of over a dozen books on technology, DIY, and geek culture. He is currently a contributor to Boing Boing, Wink Books, and Wink Fun. His free weekly-ish maker tips newsletter can be found at garstipsandtools.com.

View more articles by Gareth Branwyn

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK