Collin’s Lab: Wire Rack Attack

Technology Workshop
Collin’s Lab: Wire Rack Attack

YouTube player

Once the growing sprawl of electronic parts starts showing up in your dreams, you know you’ve got some tidying up to do. But who wants to spend hours organizing parts and gear when you could be having fun actually using it? Hmm … good point.

Well, if you do manage to pull yourself away from all that hacking and experimentation for 10 or 20 minutes, consider installing a quick-n-dirty wire rack to tame all those wild spools that roam your workbench.

Discuss this article with the rest of the community on our Discord server!

ADVERTISEMENT

Technology
Collin’s Lab: Wire Rack Attack!
YouTube player

Once the growing sprawl of electronic parts starts showing up in your dreams, you know you’ve got some tidying up to do. It can be a challenge to spend quality hacking time on humdrum sorting & parts organization, but of course, in the long run it’s a no-brainer.

WireRack_cc.jpg

I’ve yet to discover a magical motivator* for organization. But if you can put aside a few minutes for the cause, consider installing an uber-simple wire rack using plain old curtain brackets – perfect for taming those wild spools that roam your workbench.

*sadly, impromptu desk-naps do not help.

Subscribe to the MAKE Podcast in iTunes, download the m4v video directly, or watch it on YouTube and Vimeo.

Update: From the comments, Chris makes a good suggestion –

it would work well to mark and drill the lower hole for the curtain rod bracket, then put the screw in and tighten a bit, leaving it a bit loose. Then mark the upper hole exactly where it now needs to be, based on the lower hole. Let the bracket swing down and out of the way while drilling the upper hole, then swing up and screw in. Next, go back and tighten the lower screw’s nut. This way, it’s no problem if the first hole is drilled a bit off, and the marking on the second is easy.

Similarly, mount both brackets, then put the dowel in and mark for cutting based on the actual finished position of the brackets.

Very true, thanks Chris!

10 thoughts on “Collin’s Lab: Wire Rack Attack!

  1. CircuitGizmo says:

    That is nice for small spools. It is on the edge of a shelf where it doesn’t consume too much room.

    For larger spools, this is what I did: http://circuitgizmos.com/wordpress/?p=544

  2. John Park says:

    Haha, you totally need to add tassels and a crocheted wire rack cozy to complete the look.

  3. Simon says:

    That’s exactly what I did with my spools of wire although mine aren’t hung up anywhere. I just used a long piece of dowel and put a hose clip on each the end to stop the reels falling off. The whole thing lives on my messy little electronics table – a bit of board screwed to an old stool base.

  4. chris says:

    Collin: while I like this project for its organizational benefits, I think that there is a great benefit from construction directions that don’t penalize for a little slop.

    For example, it would work well to mark and drill the lower hole for the curtain rod bracket, then put the screw in and tighten a bit, leaving it a bit loose. Then mark the upper hole exactly where it now needs to be, based on the lower hole. Let the bracket swing down and out of the way while drilling the upper hole, then swing up and screw in. Next, go back and tighten the lower screw’s nut. This way, it’s no problem if the first hole is drilled a bit off, and the marking on the second is easy.

    Similarly, mount both brackets, then put the dowel in and mark for cutting based on the actual finished position of the brackets.

    Makes it a lot easier to do well, and the success inspires folks to continue on to more projects!

    1. Collin Cunningham says:

      Definitely good ideas! (added above)

Leave a Reply

Your email address will not be published. Required fields are marked *

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK