Super Awesome Sylvia’s Mousey the Junkbot

Robotics Technology
Super Awesome Sylvia’s Mousey the Junkbot


Super Awesome Sylvia builds the ambitious Mousey the Junkbot project by our very own Gareth Branwyn from MAKE v02

Ever wanted a pet but your parents wouldn’t let you? Why not try Mousey the Junkbot! Today we’ll be highlighting the build for this little light seeking bot, from spare parts and an old computer mouse. Lets go! Full details after the jump.

Subscribe to the MAKE Podcast in iTunes, download the m4v video directly, or watch it on YouTube and Vimeo.

For this zippy build, we’ll need:

First take your mouse and open it up. Before doing anything else, look at the inside of the case. It has to be big enough for battery, relay, motors, wires and sensors. If it looks like your mouse is a good fit, make room for it’s new brains by removing the board and cutting out all the plastic bits, but don’t forget to wear eye protection. Safety first!

MINI_E05_mousey_the_junkbot3.JPG

Line up where your motors will go according to the instructions, carefully cut out the body holes, then glue the motors in. To make tires for Mousey, you can simply glue a rubber band around the motor shaft. If you want to be super awesome, you can take the pulley wheels from an old audio cassette, super gluing a piece of rubber band around it for traction, then attaching these to the motor shafts with glue (they won’t fit on their own). Once that’s done, you can install the tail switch, and then the whisker switch.

De-solder the good parts off of the mouse’s controller board, then solder the two infrared LEDs to twisted wire strands (preferably solid core to allow them to be bent and moved as needed). These LEDs are run in reverse-bias mode in our circuit, allowing them to measure light and become our little junkbot’s eyes!

Now to build out Mousey’s brain on a breadboard to make sure all our parts work. As with any circuit, make sure and spot check all your connections and components before applying power. Your transistor or opamp can be ruined if not properly wired up.

Once all your circuits check out, assemble them “freeform”, one to the other, inside the mouse body according to the directions. Now that you’re all wired up, be sure and double check your circuit is correctly wired and that all your joints have continuity. If you’re happy with the results, make sure exposed wires are tucked away to avoid short circuits, then carefully pop on the top.

Once it’s together, you can decorate it! We took the two buttons from another computer mouse to make the ears and used some googley eyes and black marker for decorations.

Assuming Mousey is in good shape, it’s time to go experiment! If he’s hooked up right, your little bot will seek out and find the brightest light in a room. Have him skirt around the floor, chase a flashlight around, or try putting him in dark room with a single light and see if he finds his way over to it, it’s so much fun!

One of the best things about Mousey is that he’s a freeform bot made from spare parts. With a little work there’s lots of ways to make him better, and with even less work you can tweak his behavior in fun ways. Try bending his eye stalks or reversing his eye connections to make him seek darkness, or get some bigger wheels and geared motors for more traction.

MINI_E05_mousey_the_junkbot5.JPG

That’s all we could fit into this episode, remember to experiment, keep trying if something fails, and get out there and make something!

4 thoughts on “Super Awesome Sylvia’s Mousey the Junkbot

  1. fede142857 says:

    I swear I can hear a Windows 7 error sound almost at the end of the video.
    Wait a moment… didn’t she use Linux?

    Cool videos anyway, keep up the good work.

  2. antoniomrneto says:

    There is an error on facebook like button …

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

Becky Stern is a Content Creator at Autodesk/Instructables, and part time faculty at New York’s School of Visual Arts Products of Design grad program. Making and sharing are her two biggest passions, and she's created hundreds of free online DIY tutorials and videos, mostly about technology and its intersection with crafts. Find her @bekathwia on YouTube/Twitter/Instagram.

View more articles by Becky Stern

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK