Generational Loss In Housekey Copies

Computers & Mobile Craft & Design
Generational Loss In Housekey Copies

Brooklyn artist Daniel Bejar made a copy of the key to his apartment (hopefully not his current one, because of stuff like this). Then he made a copy of the copy. And then he repeated the process, by my count, 67 times. At which point the copy was an uncut blank. Kind of like I Am Sitting In a Room, but with keys. He calls it Visual Topography of a Generation Gap. [via Boing Boing]

More:

24 thoughts on “Generational Loss In Housekey Copies

  1. Anonymous says:

    That’s some pretty atrocious loss going on. His key-copying would appear to have a problem.

    I have no doubt that generational loss is real, given that my own housekeys are copies-of-copies … and three separate sets of ‘backup keys’ can’t open my doors. But the ‘failure mode’ isn’t “hey, everything rightshifts one mm!”, it’s a more irritating ‘grooves widen, peaks flatten’ sort of mushiness.

    1. Gabe Shackle says:

      I agree it seems far too regular an error to be truly random.

      I think a more interesting experiment would be to make a family-tree style graph of keys where you make two copies of each key, then once a key stops working it can no longer be duplicated and that family line ends.

    2. John says:

      Perhaps it is a different setup? Someone should try to reproduce.

    3. Anonymous says:

      So, more of a lowpass filter keycutter, then?

  2. SSH22 says:

    I’m guessing at some point it didn’t open the door anymore.

  3. Anonymous says:

    indeed seems more like a systematic error than an accumulation of random errors.

  4. Katherine Donahoe says:

    I don’t know that we should trust this man. He is a known pornographer.

    Just kidding, this is great. Interesting that the loss seems to be solely dependent on the position of the notches, and not their size.

  5. Timothy Gray says:

    That is due to a gross misalignment in the key cutter. a well adjusted key cutter can go a lot farther in generations.

    A key cutter that badly aligned will have problems making even a single key that will work properly.

  6. Anonymous says:

    Looks like the lateral offset of the copier is off slightly, causing a forward marching of the tooth pattern.

    Wouldn’t be hard to do, and probably faster to get an effect than an actual generational loss, i.e. random edge errors in the cuts.

    Key copiers are pretty accurate, if they’re setup and run correctly. So you have to intentionally botch it somehow to get something visible without doing thousands of keys (which gets a bit expensive, I’d wager…)

    1. Jon Wolff says:

      Yes it is offset. The “old” key is farther in the machine than the “new” key causing this pattern in the cut to be transfered to each “new” key when it is cut.

  7. Anonymous says:

    Phase error .NE. 0

  8. Abdulsalam Almekhlafi says:

    I don’t know that we should trust this man.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

I am descended from 5,000 generations of tool-using primates. Also, I went to college and stuff. I am a long-time contributor to MAKE magazine and makezine.com. My work has also appeared in ReadyMade, c't – Magazin für Computertechnik, and The Wall Street Journal.

View more articles by Sean Michael Ragan

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK