Stirling Engine Generates 1 Watt

Workshop

Doug Conner‘s Stirling engine may be viewed at the upcoming Bay Are Maker Faire. Check it!

This Stirling engine delivers 1W to a stepper motor used as generator to power a high-power LED. This engine uses electrical heating for simplicity and to simplify efficiency measurements. At 1.7% efficiency, it’s not a good way to power your lights! It’s only for research.

4 thoughts on “Stirling Engine Generates 1 Watt

  1. PhysBrain says:

    Sure, it’s not a good way to convert electrically, or even chemically, generated heat into electricity. But let’s say you happened to have ready access to a large flat surface – like say a roof or drive way – that get’s reliably heated by the sun every day. That’s energy that would otherwise be going to waste. How much power per unit area could one generate by pulling heat off of a parking lot, or the roof of a residential or commercial building? Let’s assume that the cold sink is provided by a water main. Anyone wanna run the numbers?

    1. Anonymous says:

      Use the earth as a cold sink, not a water main. More mass for the heat sink, without having to waste water, or have hot water that you don’t want. At 100W/Sq M, more or less, you’d probably get a few watts per square meter. Wonder if you’d do better with a Peltier junction…

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

My interests include writing, electronics, RPGs, scifi, hackers & hackerspaces, 3D printing, building sets & toys. @johnbaichtal nerdage.net

View more articles by John Baichtal

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK