Intern’s Corner: Dan Spangler and His Combustion Cannon

Intern’s Corner: Dan Spangler and His Combustion Cannon

In this installment of Intern’s Corner, our brand spankin’ new Make: Labs intern, Daniel Spangler, shares the details (and gives of a video tour) of his badass internal combustion cannon with interchangeable barrels. We haven’t broken it to him yet, but to keep us happy, he’s going to have to help each of us make one. Welcome aboard, Dan! -Gareth

YouTube player

My interest in cannons started back in high school, when an attempt to make a hydrogen converter went horribly wrong, shattering the florescent bulb in my garage and singeing my eyebrows off. After changing my pants, I looked at what was left and thought, “Hmmmmmm…”

The rest is history. I soon cobbled together a suitable cannon-ish device that could propel small 3/4-inch dowels through about five layers of cardboard, and that was fun, but I had to do more — it always had to be bigger, louder, more reliable, and more powerful. So I kept building. I would build some for me, some for friends, and they kept growing in size and complexity… ’til I achieved what you see here.

This is my advance combustion cannon. It utilizes two BBQ piezoelectric igniters to touch off the propane/air mixture inside the 3-foot-long by 4-inch-diameter combustion chamber. A special metering system using an air regulator, two ball valves, and a specific length of steel pipe ensures that the correct amount of fuel is injected into the combustion chamber. You operate it by tuning the regulator to the specified 90 psi, opening the first ball valve to allow the steel pipe to be pressurized, then after closing the first valve, you open the second one to discharge the gas in the steel pipe into the combustion chamber. From there, a computer fan mounted inside the combustion chamber mixes the air and fuel to create clean, thorough combustion. I have two interchangeable barrels for this cannon. One is a sleeved 3-inch barrel that’s perfect for shooting soda cans, the other is a 6-foot-long 2 1/2-inch bore barrel that launches tennis balls far enough so you can’t see where they land. This cannon is really fun. It fires almost every time, and shooting empty cans is a safe and entertaining way to show it off.

Now you may be wondering, “What’s your next step?” Well, I have been working on plans for a multi-barrel, belt-fed, fully automatic gatling cannon that utilizes a special spud-gun cannon shell that I’ve designed. I haven’t really gone anywhere with it since i didn’t have the funds for the tools, but now that I’ve joined the ranks of the Make: Labs Engineering Interns, anything is possible. We shall see…

[Photo by Gregory Hayes]

34 thoughts on “Intern’s Corner: Dan Spangler and His Combustion Cannon

  1. Anonymous says:

    Impressive rig!  I have had ignition troubles with my spud guns and would love to see your ignition system for this beast.   Now that you are working for make, when can we expect to see this featured as an article in the magazine or at the very least as an instructable? 

    Also look forward to your belt-fed creation in the future!

  2. roland stolfa says:

    Man I want one!  WAY Cool…but what was in the can that made the big explosion on the first video above?  Was it just the propane that was “left” in the can as it exited the barrel?

    1. Eina r K says:

      Very creative video editing made the tree blow up..

    2. Eina r K says:

      Very creative video editing made the tree blow up..

  3. roland stolfa says:

    Man I want one!  WAY Cool…but what was in the can that made the big explosion on the first video above?  Was it just the propane that was “left” in the can as it exited the barrel?

  4. roland stolfa says:

    Way COOL!  I want one….but what was in the can that exploded so nicely at the end of the first video?  Was it just the propane left in the can?

    1. Jeff Saltzman says:

      Methinks those were effects of the “special” variety ;)

    2. Jeff Saltzman says:

      Methinks those were effects of the “special” variety ;)

      1. AllanA says:

        Methinks two……..

        But why?

        1. Anonymous says:

          Um… fun?

  5. roland stolfa says:

    Way COOL!  I want one….but what was in the can that exploded so nicely at the end of the first video?  Was it just the propane left in the can?

  6. Thomas Harris says:

    fun untill the pvc explodes in your face

  7. Anonymous says:

    Brushless fan, I hope?

    It’s black.  So, does that mean you have located a source for solid ABS pipe and fixtures?  Can’t find the stuff here in the Northeast US. The best I could do was DWV only (not pressure rated).  Any suggestions?

  8. Anonymous says:

    Brushless fan, I hope?

    It’s black.  So, does that mean you have located a source for solid ABS pipe and fixtures?  Can’t find the stuff here in the Northeast US. The best I could do was DWV only (not pressure rated).  Any suggestions?

  9. Eina r K says:

    CGI and bullshit

    1. Eina r K says:

      By that, I mean that the tree exploding with a fireball is not real.

      Have no problem with the spud gun itself.

  10. Eina r K says:

    CGI and bullshit

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged
Dan Spangler

Dan Spangler is a freelance maker with a passion for fabricating speed, high voltage, and the things that go boom.

View more articles by Dan Spangler

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK