Math Monday: Nested Helices

Science Woodworking
Math Monday: Nested Helices

By George Hart for the Museum of Mathematics

Math_Monday_banner02_600px.jpg

If you want to make a screw of wood, the first tool you would think baout is a lathe. But you can also make a screw on a scroll saw. In fact, I was stunned to learn of a surprising technique for using a scroll saw to make nested screws from a single cylinder of wood. These four helices were cut by Steve Garrison, who was the first to think of this, as far as I know.

They nest inside of each other beautifully, because they started out that way. Steve’s website explains the technique, which is so simple that anyone can make a basic screw in minutes. Simply tilt the scroll saw table, clamp a piece of wood to the table to serve as a fence, and push a dowel through the blade while twisting it. To make a smooth spiral cut, first mark a spiral on the dowel, to guide you in controlling the twist as you push. Use a “spiral” blade, which has teeth on all sides, because different parts of the rotating wood hit opposite sides of the blade. In general, the top of the blade will trace one spiral on the cylinder’s surface and the bottom of the blade will trace another. What Steve realized is that by varying the table tilt and the distance from the blade to the cylinder’s center line, you have two parameters for adjusting where those two helices lie on the surface. There are multiple combinations of these parameters which make the two surface spirals coincide. In other words, the blade can always come out of the same spiral from which it enters, while cutting in at various depths.

Because these surfaces are cut by a moving line, all the spirals are examples of ruled surfaces and, more specifically, are types of generalized helicoid.

I have found this a great puzzle to hand to a woodworker and ask them how they think is was made.

More:
See all of George Hart’s Math Monday columns

4 thoughts on “Math Monday: Nested Helices

  1. Anonymous says:

    All left-handed screws?  Is that a political statement?

  2. test now says:

    How To Make Helix Forms With A Scroll Saw Video:

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

Gareth Branwyn is a freelance writer and the former Editorial Director of Maker Media. He is the author or editor of over a dozen books on technology, DIY, and geek culture. He is currently a contributor to Boing Boing, Wink Books, and Wink Fun. His free weekly-ish maker tips newsletter can be found at garstipsandtools.com.

View more articles by Gareth Branwyn

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK