Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Comments

  1. Pete Rippe says:

    http://koti.kapsi.fi/hvartial/

    Hannu’s Boatyard is an awesome resource for single, and two sheet plywood boats, currently working on the 1 1/2 sheet ‘array punt’ with intentions of adding a tiny motor : )

    alot of theory of how to maximize plywood usage and most designs are not square, including an incredible 18′ canoe: 1 sheet!!

    The author conveyed to me that the past couple of years his focus has been elsewhere, thus the site hasn’t been updated, and i almost feel bad sending him a flood of MAKE: viewer emails ;)

  2. Ren Tescher says:

    How could I not “like” this?  He has 2 Yellow Labs!

    1. Anonymous says:

      Thanks Ren! Our Labs, Henry and Charlie, are a big part of our lives. They are in most of our videos. They wont sit still in a boat, they always want to swim alongside.

  3. Dane Cobra O says:

    This would be fun with the electric drill trolling motor that was featured a few weeks ago…

  4. Dane Cobra O says:

    This would be fun with the electric drill trolling motor that was featured a few weeks ago…

  5. Nick Burns says:

    Silicone, not silicon

  6. Anonymous says:

    Big thanks to Becky for posting our vid here. and thanks to Derek for the lightbulb moment to build this.

    Now working on a 1 1/2 sheet boat with plywood left over from Hurricane Irene prepardness.  thx! eric.

  7. Tim Lewallen says:

    Both GardenFork and Tiny Yellow House are great blogs/podcasts. Approachable and fun projects!

  8. Tim Lewallen says:

    Both GardenFork and Tiny Yellow House are great blogs/podcasts. Approachable and fun projects!

  9. Tim Lewallen says:

    Both GardenFork and Tiny Yellow House are great blogs/podcasts. Approachable and fun projects!

  10. Marsee Henon says:

    I want to build one of these for my neighborhood.

  11. I was about to link Hannu’s Boatyard, too, but apparently Pete Rippe was miles ahead of me :)

  12. I was about to link Hannu’s Boatyard, too, but apparently Pete Rippe was miles ahead of me :)

  13. I was about to link Hannu’s Boatyard, too, but apparently Pete Rippe was miles ahead of me :)

  14. I was about to link Hannu’s Boatyard, too, but apparently Pete Rippe was miles ahead of me :)

  15. Luke Lathroum says:

    I’m thinking combine this with that drill motor thing from a couple weekends ago but replace the drill with the 36v dewalt and the battery pack with some thunderstruck cells

  16. Luke Lathroum says:

    I’m thinking combine this with that drill motor thing from a couple weekends ago but replace the drill with the 36v dewalt and the battery pack with some thunderstruck cells

In the Maker Shed