Super Simple Copper Etching — Sylvia’s Mini Maker Show

Super Simple Copper Etching — Sylvia’s Mini Maker Show

YouTube player

Did you ever want to upgrade your bread-boarded circuits to something more permanent? Or maybe you’ve got a hankering to make your own metal Jelwery? Today Sylvia will show you how you can do both with super simple copper etching. More info: http://wp.me/p1CIX9-tbq

2 thoughts on “Super Simple Copper Etching — Sylvia’s Mini Maker Show

  1. FYP (Final Year Project) Tips for Developing Electronic Hardware - BM - Tutorial by Cytron says:

    […] 2. Teknik menggunakan toner transfer (panas) daripada Sylvia Todd: Super Simple Copper Etching — Sylvia’s Mini Maker Show […]

  2. 7 Tips for Developing Electronic Hardware – (BM) – Tutorial by Cytron says:

    […] 2. Teknik menggunakan toner transfer (panas) daripada Sylvia Todd: Super Simple Copper Etching — Sylvia’s Mini Maker Show […]

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Craft & Design Technology
Super Simple Copper Etching – Sylvia’s Mini Maker Show

By Super Awesome Sylvia and her dad, James

Did you ever want to upgrade your bread-boarded circuits to something more permanent? Or maybe you’ve got a hankering to make your own metal jewelry? Today we’ll show you how you can do both. With super simple copper etching. Lets go!

Subscribe to Sylvia’s Mini Maker Show Podcast in iTunes, download the m4v video directly, or watch it on YouTube and Vimeo.

For this coppertastic build,  we’ll need:

  • Eye protection and gloves (rubber/latex/nitrile, any kind will do)
  • Ferric chloride etchant (Found at some electronics stores, or online)
  • Regular printer paper
  • Printable plastic film or really thin glossy magazine pages, and access to a laser printer or copier
  • A clothes iron
  • Some fine steel wool
  • and finally, some paper towels (it gets messy!)

For making jewelry, we’ll also need:

  • Some solid pieces of copper or brass (found at fancy art stores)
  • and a plastic or glass container than can fit your piece to be etched

For circuit boards, instead we’ll need:

First things first, we need an image. What are we putting on our copper? If you’ve got a circuit design ready in your cad software, export a high resolution monochrome image of just the traces you want, or a high contrast piece of art for your jewelry, carefully print your design out on plastic or magazine paper.

Continue reading “Super Simple Copper Etching – Sylvia’s Mini Maker Show”

17 thoughts on “Super Simple Copper Etching – Sylvia’s Mini Maker Show

  1. Chad Lovelace says:

    Like this !!

    but im looking for a simple program to create the traces and will be able to print out the design — free windows software would be great!!
    thanks

  2. John Beale says:

    > “looking for a simple program to create the traces…”
    I have not used it myself, but I believe “Fritzing” can do PCB design:  http://fritzing.org/
    It is a free download, runs on Windows, and is probably easier to use than the bigger PCB tools such as KiCad (which is also free, but has more of a learning curve), or CadSoft Eagle (limited free version available).

  3. John Beale says:

    Actually, there is quite a list of possible PCB design/layout tools here: http://fritzing.org/about/comparison/ and I think most/all of them run under Windows.
    http://www.freepcb.com/ is another good one to try.

  4. Big says:

    I just have to say Douglas Adams was one of my favorite writers loved the DON’T PANIC! slipped in there.

  5. Dave Brunker says:

    This episode made it to radioham.info so now Sylvia is advising hams on how to create their own circuit boards.  Way to go!

  6. Brian Hall says:

    Check out my 5 year old with a soldering iron….

  7. Brian Hall says:

    Check out my 5 year old with a soldering iron….

  8. Scott Tovey says:

    Mom and Dad need to get to getter with Sylvia and do some 30 minute maker shows and air on Make TV and PBS.

    These little maker shows Sylvia does would be great motivations to other children her age as well as encourage other mom’s and dad’s to help their young ones pursue DIY maker projects.

  9. Wayne says:

    I etch toner transfer method boards using the immerse & rock method. It’s less likely to remove any of the toner that isn’t strongly adhered to the board. Originally, I tried immersing, rocking and some rubbing with a sponge brush, but the brush removed a small amount of the toner, making copper traces thinner. I also warm the ferric chloride in a pot of hot water before etching. At about 150 deg F the etching goes much faster, and speedy etching reduces the chances of etch working under the edges of the toner resist (“under cutting”). –Wayne

Leave a Reply

Your email address will not be published. Required fields are marked *

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK