Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

If you’re looking for an interesting project for your DSLR camera, you might find the DIY Tilt-Shift lens from Flickr user Maciej Pietuszynski to be worthy of your weekend project time. Maciej’s version uses a shower head and rubber glove in addition to a 50mm/1.8 prime lens. If you’re comfortable cutting a pipe with a hacksaw and disassembling a perfectly good lens, you can pull off this build. The images a lens like this produces more than makes up for the time it takes to assemble. [via DIYP]

Sample image:

Adam Flaherty

I make cool stuff and write about other people making cool stuff on makezine.com. If you have something you think I should see, send me a tip.


Related

Comments

  1. Iva Biggun says:

    Any instructions? The drawing is so bad it’s impossible to tell anything from it.

  2. [...] Shower head, rubber glove, 50mm…tilted!!! (via DYIP via MAKE) [...]

  3. Related: Check out my fave lens guy Bhautik Joshi -

    http://blog.cow.mooh.org/2009/07/plungercam-2-cheaper-and-more.html

    he has a bunch of crazy lens projects at

    http://cow.mooh.org/projects/

  4. [...] DIYP, MAKE] ← Vorheriger Beitrag Ein noch größeres Galaxy Note kommt Nächster Beitrag [...]

  5. [...] Shower head, rubber glove, 50mm…tilted!!! | maciekpp via DIYPhotography.net and MAKE [...]

  6. [...] time – finally decided to replace it with a new, non-broken fully useable one. planning on doing this with the old [...]

  7. [...] Shower head, rubber glove, 50mm…tilted!!! [maciekpp via DIYPhotography.net and MAKE] [...]