Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

makergear mosaic with minimug Building the MakerGear Mosaic 3D Printer Part VIII: The First Print

Due to popular demand, I’ve decided to take my MakerGear Mosaic assembly guide one step further, past the physical construction of the robot, and cover the process of getting through the first print.

I’ve now completely built two hobby-class CNC tools, from kits, and assisted in the construction of two more. And in my experience, it seems like getting the robot built is at best half the work of getting to the first complete job. Once you have the hardware ready to go, the number of options for your setup expands quite rapidly depending on the type of computer you’re using, its operating system, and the CAD, CAM, and host software packages you choose. I dedicated an old laptop to my printer, running Windows XP SP3, and am using a software toolchain consisting of SketchUp, Slic3r, and Pronterface. This is the most basic, user-friendly setup I can think of. But your mileage, as they say, may vary.

minimug under test Building the MakerGear Mosaic 3D Printer Part VIII: The First Print

Traditionally, the first print off of a RepRap is supposed to be a shot glass, and the traditional file is minimug.stl. The original minimug file is available on the RepRap wiki, but for whatever reasons it is rotated at an unprintable angle, which is inconvenient for beginners. I have rotated it upright, centered it on the X and Y axes, and set its lower extremity at Z=0 and reposted it on Thingiverse.

What you test your shot glass with, of course, is entirely up to you. Personally, I’ve found Glenfiddich Solera Reserve to be an excellent choice. Its viscosity is lower than that of water, and thus makes for a better test of the integrity of your printed shot glass. And it’s easily disposed of when the test is complete.

The MakerGear Mosaic 3D Printer – Part VIII: The First Print

More:

Sean Michael Ragan

I am descended from 5,000 generations of tool-using primates. Also, I went to college and stuff. I am a long-time contributor to MAKE magazine and makezine.com. My work has also appeared in ReadyMade, c’t – Magazin für Computertechnik, and The Wall Street Journal.


Related
blog comments powered by Disqus
Follow

Get every new post delivered to your Inbox.

Join 28,201 other followers