Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

A collaboration between Stratasys and Optomec, Inc. has produced the first 3D printed UAV wing with surface printed electronics. Using Optomec’s proprietary Aerosol Jet system, the team was able to incorporate sensor, antenna, and other circuitry directly on to the surface of the final Stratasys Fused Deposition Modeling (FDM) output. The process allows designers to create new lighter weight designs using fewer materials in less time. [via Forbes]

Adam Flaherty

I make cool stuff and write about other people making cool stuff on If you have something you think I should see, send me a tip.



  1. Kevin Granade says:

    Now combine this with mike estee’s cardboard quadcopter and we’ll really have something :)

  2. rocketguy1701 says:

    Freaking awesome. Please keep following this as it develops, this looks like it’s going to be a huge advance for aircraft construction, among other things.

  3. Scott says:

    Very cool, but my first thought was: What happens if an electronic component fails, do you scrap the whole vehicle, or is it repairable?

  4. Ryan says:

    Hey that gearbox is the exact same one used in parkzone and hobby zone micro hobby airplanes!

  5. Tom says:

    Wondering how robust the circuitry would be on a high flexing wing…