Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Wire strippers?

On Brookelynn Morris’ video instructions for our zippy new Supercap Racer kit, YouTube user hevyAccel makes a thoughtful comment:

You have to be more PC! They aren’t wire strippers! They are “exotic pliers!”

Thank you, hevyAccel — you are absolutely right. I am using the term “exotic pliers” from now on!

(Check out the kit– these things are fun!)

paul spinrad

Paul Spinrad

I’m a broad-spectrum enthusiast, writer, editor (Wired, MAKE), maker, and dad who lives in San Francisco and hatches schemes at investian.com.


Related

Comments

  1. ka1axy says:

    I prefer to use a pair of dikes (“diagonal cutters” takes too long to say) to cut wire.

    1. rocketguy1701 says:

      I was training an network cabling crew that comprised of two openly lesbian women, and got to the part where I explained “this is a pair of dikes” and realized what I had just said. I think that was the reddest I ever turned, while rapidly explaining the etiology of the phrase from diagonal cutters… Fortunately I think they were more amused at my coloration than offended.

      1. ka1axy says:

        It’s probably a good thing that we don’t use resistor color codes any more. The little phrase that’s stuck in my mind was never very PC, but perfectly engineered to stick in the mind of a teen boy, so I have to admire that.

        I work with female engineers, too, which is a very good thing — we’ve been driving half the good minds out there into other careers for way too long.

  2. datamonger says:

    Sorry, sticking with wire strippers…just try going to buy a pair of exotic pliers anywhere (try doing an Internet search). People get too wound up in finding offensive meanings in things that people say. I say if you do that, you need a vacation. Dikes are diagonal cutters, wire strippers are not exotic pliers. Are we going to start calling a screwdriver a rotary fastener tool?

    1. Paul Spinrad says:

      I like “rotary fastener tool” — but first we should OK that designation with the Rotary Club to make sure they’re comfortable with it.