Airsoft Gun Turned Into a Soldering Iron

Technology
Airsoft Gun Turned Into a Soldering Iron
YouTube player

Instructables member mikeasaurus wrote in with his Airsoft Soldering Gun project, which adds the guts of a cordless soldering iron to an airsoft pistol, with the battery held in the clip!

A soldering gun is a pistol-shaped soldering tool, named for their rough appearance to a firearm.
Why settle for an approximation when you can have a real soldering gun?! Bring this little baby to bear on your next PCB. Point, pull, and let the heater rip.

It’s not so far fetched: A steady hand, a careful aim, an unsafe quantities of lead…soldering and firing a gun have an awful lot in common. Making your own is easy, all you need is an air pistol and a hand-held, battery powered soldering iron and you can make your own soldering gun.

10 thoughts on “Airsoft Gun Turned Into a Soldering Iron

  1. StripeyType says:

    s/clip/magazine/

    Nomenclature matters. See here: http://www.kzinhome.net/blog/2008/04/authors-take-a-peek/

    1. David says:

      I’m confused, what is you objection to the nomenclature here? The video say magazine, the battery is fitted inside what was the pistol magazine. At least, according to the link you provided, its a magazine, I’m not a expert.

      1. Jeremy Parisi says:

        Magazine not clip is the gun nerd’s version of ATM machine or PIN number.

    2. Mike Linnell says:

      Seems like the author of that take-a-peek went off on a word trip. Magazine is a misnomer or slang term when applied to hand guns they are all clips actually. Historically a magazine is storage area made to protect ammunition supplies for field artillery or in the case of a ship a compartment to store naval munitions. Magazine became a term to describe the storage clip beneath a rifle or pistol as being analogous to naval munitions storage which was usually located below the guns and below the water line. So essentially they are all clips and the word snobs got it wrong sorry ….

  2. David says:

    That is a very cool idea, nicely implemented. But, does it cool down equally quickly? Or is all that fancy finger work at the end only once its been turned off for a while? Otherwise, he can look forward to scorched jeans and burned thighs.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

My interests include writing, electronics, RPGs, scifi, hackers & hackerspaces, 3D printing, building sets & toys. @johnbaichtal nerdage.net

View more articles by John Baichtal

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK