9 Volt Battery & Coca Cola Titanium Anodizer

Home Science Technology

NYC Resistor’s Herb “POTUS31” Hoover experimented with a titanium anodizer project that uses daisy-chained 9V batteries and a sponge soaked in Coke.

I’ve been wanting to anodize titanium and use the laser to create masks for the different colors. Translucent oxides form on titanium with heat or voltage. (I also tried lasering colors into niobium, which oxidizes similarly to titanium, but didn’t find the color band with the CO2 beam — just grey/black.) With both niobium and titanium, each volt corresponds to a thickness of oxide and refraction of a color. If you start at the highest voltage and work your way down to the lowest voltage for the colors you choose, theoretically, you can strip off the protective tape mask after each color is obtained and the thicker oxides (higher voltages) will be unaffected by lower voltage oxide layers. In essence, when anodizing with a tape mask, you are using a reductive method of printmaking like linoleum block printing, only the ink is an oxide layer.

DC voltage is applied to the surface of the titanium/niobium with a sponge clipped into an electrode. The ideal electrolyte to complete the circuit is phosphoric acid, so you wet the sponge with cola, or a solution of TSP, Cafiza, or Miracle-Gro. Two factors determine the oxide layer thickness: Voltage and time. If you vary the speed of your sponge with the electrolyte across the titanium, you’ll get a variety of colors due to incomplete oxidation at and below that voltage. It’s also possible to make a gradient by starting slowly and speeding up as you sponge across the metal.

8 thoughts on “9 Volt Battery & Coca Cola Titanium Anodizer

  1. Inanimate Carbon Rod says:

    How long do the batteries last. Wouldn’t it be a cheaper solution to build a 100 VDC power supply?

  2. I got 99 volts and my anodizing’s done! - Hack a Day says:

    […] [via Make] Share this: […]

  3. MAKE | Top 10: Marvellous Metals says:

    […] 9 Volt Battery and Coca-Cola Titanium Anodizer […]

  4. Top 10: Marvelous Metals | vis a vis | visual mind says:

    […] 9 Volt Battery and Coca-Cola Titanium Anodizer […]

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

My interests include writing, electronics, RPGs, scifi, hackers & hackerspaces, 3D printing, building sets & toys. @johnbaichtal nerdage.net

View more articles by John Baichtal

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK