Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Dave Sharp of the Hive76 hackerspace has been playing around with garden hose hydraulics, and the result is rather cool:

The pressure in your typical garden hose is nominally around 40 psi or so, so my first hydraulic cylinder should be able to develop about 125 pounds of force if it had really good seals. This is a proof of concept so I didn’t bother with o-rings or anything, so it leaks like crazy and thus is unable to develop quite those kinds of pressures, although it is quite strong. Moving from a 2″ to a 3″ hydraulic cylinder would bring this up to about 282 pounds of force, not too shabby for garden hose power!

The hydraulic cylinder is made of standard PVC pipe (2″ for the cylinder and 1.5″ for the ram), although I had to use my lathe to turn down a 1.5″ pipe cap to fit inside the outer cylinder. The control valve is made of 1/2″ CPVC fittings and tubing, with the exception of the spool which is a length of 1/2″ solid PVC rod. I had to turn down the spool on my lathe to the appropriate profile and also had to drill out the valve to fit it. The fit is fairly poor but it shows that the concept definitely works. Eventually I am hoping to be able to have all the custom parts injection molded to get the unit cost down cheap enough that it would make a good toy for DIY doodlers and budding engineers everywhere.

John Baichtal

My interests include writing, electronics, RPGs, scifi, hackers & hackerspaces, 3D printing, building sets & toys. @johnbaichtal nerdage.net


Related
blog comments powered by Disqus

Featured Products from the MakerShed

Follow

Get every new post delivered to your Inbox.

Join 25,879 other followers