Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

If you come from the world of microcontroller development boards like the Arduino, you’re used to serial processing, where instructions are processed one at time, following the procedure that you write in code. For some applications, such as with video or sound processing, it’s hard for a microcontroller to process data fast enough. Enter the FPGA, short for field-programmable gate array. An FPGA can process data and take action on it, with multiple operations happening in parrallel.

If you’re interested in learning more about what an FPGA can do, you can visit Michael Jones in the Maker Pavilion this weekend at World Maker Faire New York. He’ll be showing off the FPGA MARK-1, which he designed with Eli Hughes. FPGA MARK-1 is a “development platform designed with students, makers, hobbyists and mad scientists in mind.” In addition, he’ll be demoing an expansion board suited for educational use which allows you to connect a PS/2 mouse, keyboard, VGA video, audio, and Nintendo game controllers to the board. While he’s never been to a Maker Faire before, he says he’s “looking forward to being part of an event that brings so much creativity, talent, ambition from worldwide locations localized into one spot.”

Matt Richardson

Matt Richardson

Matt Richardson is a Brooklyn-based creative technologist, Contributing Editor at MAKE, and Resident Research Fellow at New York University’s Interactive Telecommunications Program (ITP). He’s the co-author of Getting Started with Raspberry Pi and the author of Getting Started with BeagleBone.


Related

Comments

  1. Billy says:

    I saw something very similar to this at last years maker faire called the Alien Cortex. I had actually ended up purchasing it. I’m sure its just a coincidence but I figured I should point it out.

  2. [...] make. Bookmark on Delicious Digg this post Recommend on Facebook Share on identica Share on Linkedin [...]