Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

MCor Paper Printing Process Example

Mcor IRIS Paper-Based Full Color 3D PrinterIreland’s Mcor Technologies, whose paper-based 3D printing process we wrote about just last Monday, has entered into a deal with Staples’ Printing Systems Division to launch a new 3D printing service called “Staples Easy 3D.”  The service will be offered starting in early 2013 in the Netherlands and Belgium only, with plans to expand to other countries soon thereafter. It will provide full-color 3D models printed using Mcor’s full-color paper-based IRIS printer, which takes regular letter-sized paper and has a build envelope of 9.39 × 6.89 × 5.9in. [via PopSci]

Mcor Technologies and Staples division launch 3D printing service | Mcor Technologies

2013 MAKE Ultimate Guide To 3D Printing

  • 3D Printers Buyer's Guide — 15 Reviewed
  • Getting Started in 3D
  • Learn the Software Toolchain
  • 3D Design for Beginners
  • 3D Printing without a Printer

Buy now!

Just Released! 2014 MAKE Ultimate Guide To 3D Printing

Sean Michael Ragan

I am descended from 5,000 generations of tool-using primates. Also, I went to college and stuff. I write for MAKE, serve as Technical Editor for MAKE magazine, and develop original DIY content for Make: Projects.


Related

Comments

  1. [...] December 3, 2012 Makezine.com Staples Rolling Out Pilot 3D Printing Service Click Here [...]

  2. [...] you regularly get asked if you can print any of the above for someone but soon Staples can do it for them [...]

  3. […] I'd gotten more footage of some of the other systems there. One is an amazing paper system, Mcor's IRIS machine that prints on standard copy paper, then glues each sheet down, and cuts out the perimeter […]

  4. […] as close as 20″ away. Best of all the entire system costs $399 and will be in hundreds of Staples stores starting on November 18, […]