How Does a Fan Oscillator Work?

Home
How Does a Fan Oscillator Work?

wWzgAtv
That’s how. [via Reddit]

10 thoughts on “How Does a Fan Oscillator Work?

  1. miroslava von schlochbaum says:

    now that, may be the most humble and useful use of an animated gif yet. (now do low end (pop loose) rice cooker)

  2. Alan S. Blue says:

    Having disassembled a variety of these suckers, I’m more interested in a detailed discussion of how the typical “flat plate AC motor” inside them works. From the standpoint of designing my own. Even a good name to shove into Bing would be nice.

    For those that have no idea what I’m talking about (sizes vary, naturally):
    Picture a four-inch by four-inch stack of 1/16th inch iron plates that ends up 1 inch high. They have a large hole drilled through the entire stack, roughly one inch diameter. That hole is the central axis of the fan, and is very nearly filled by a magnets-and-iron cylinder on the main shaft. The side view of the cylinder is much like a barber pole in the arrangements of magnets and iron. There’s also a thick copper tube wrapped around (and through) one side of the plates. The only other electrical component is a transformer between wall AC and the copper windings.

    These suckers are obviously dirt cheap given how often they show up. But they always seem to fail in the bearings supporting the central cylinder. The cylinder moves off the center and starts ‘binding’, then the wiring overheats somewhere and you have another piece of junk. I’ve never had success “just replacing the bearings”, because placement is quite crucial and there are never any arrangements for adjustments.

    The bearings are the -only- wear point, and they’re often complete drek. I’ve seen just straight brass bushings used, for instance. But now I have an entire box of the central cylinders to use … and stymied on how -exactly- the plates and windings are working.

    1. Trav says:

      What you’re looking at is called a “shaded-pole motor”

      1. Alan S. Blue says:

        Wiki page and everything. Excellent. Thank you very much.

  3. Poet says:

    An Oscillating fan is anoying at best and tortuous to deal with at worst.
    I find them to cause more discomfort than they “cure”.
    Oh that seel so……. Oh its back …….. then you fix the thing so the torture ends.

  4. Sam says:

    Does anyone know the right mates of this i want to draw it on inventor for an assignment of mine.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

Matt Richardson is a San Francisco-based creative technologist and Contributing Editor at MAKE. He’s the co-author of Getting Started with Raspberry Pi and the author of Getting Started with BeagleBone.

View more articles by Matt Richardson

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK