How-To: Ball-in-Cage Switch

Technology
How-To: Ball-in-Cage Switch

Ball-in-cage switch

Component of the Month: SwitchesA ball-in-cage switch is a mechanical alarm switch that works on an ingenious principle. It has a single relatively unstable “open” position, in which a metal ball rests in a small divot in an insulating base, inside a cage made from two U-shaped metal staples that overlap one another without contacting. The ball is too big to pass between the “bars” of the cage, but small enough that it can rest in the divot without contacting them.

When the switch is jostled, the ball rolls free from its divot and comes to rest against two bars of the cage, closing the circuit. The sensitivity of the switch can be adjusted by increasing or decreasing the size of the divot which holds the ball in the “open” position (a smaller divot makes a more sensitive switch) or by adjusting the stability of the insulating base (a base that is easier to tip over makes a more sensitive switch).

The ball-in-cage switch has a bit of a nasty reputation as a trigger for bombs and booby traps, but it has plenty of “nice guy” applications as a simple alarm, event sensor, or photo trigger. It is reliable, versatile, and easy to reset. This design uses a 1/2″ PVC pipe cap, a short section of wooden dowel cut from a broom handle, a couple pieces of brass rod, some wire, and a brass ball.

Make: Projects — Ball-in-Cage Alarm Switch

6 thoughts on “How-To: Ball-in-Cage Switch

  1. Wilson! says:

    First it was how to build a terrorist UAV (diy drone). Now Make is showing us how to make bomb triggers.

    (I keed, I keed – this is pretty cool. I can think of some fun applications in the “keep the cat off the furniture” area)

  2. miroslava von schlochbaum says:

    cool! next show us the old: two contacts rubber-banded on either-side of an aspirin tablet ‘flood detector’ switch.

  3. Eric Weinhoffer says:

    Great post, Sean! I love switches like these; a few similarly clever concepts are used as anti-cheating devices in pinball: http://www.pinball-fixers.com/PINBALL-HISTORY/tilt-mechanism.html

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

I am descended from 5,000 generations of tool-using primates. Also, I went to college and stuff. I am a long-time contributor to MAKE magazine and makezine.com. My work has also appeared in ReadyMade, c't – Magazin für Computertechnik, and The Wall Street Journal.

View more articles by Sean Michael Ragan

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK