Sound Makers Unite at Stanford

3D Printing & Imaging Music
Sound Makers Unite at Stanford

This weekend I went down to Palo Alto to check out the DIY Musical Instrument Tailgate Party, hosted by Thingamajigs and the Center for Computer Research in Music and Acoustics (CCRMA).

The fun, welcoming event was an amplified (pun intended) meetup, where makers could show off their projects and prototypes to each other. The public was invited to interact with the makers and the instruments and there were several performances throughout the afternoon as well.

music11

The Shambler, below, created by Eric Strauss, consists of of two traffic cones, a ShopVac, and PVC.  The drums are built by Strauss himself.

The project is “a series of blown idiophones which incorporate large diameter drum heads excited by a compressed air driver. By varying position and pressure of the heads and/or drivers, various harmonic effects are produced. When two are played together they share a common air supply and become pneumatically and tonally interactive with each other.”

music5

Zombie Taxa Zero 1, by John Granzow, Denton Fredrickson, and Chris Chafe, combines ancient music science with modern 3D printing technology to an eerie effect. Says Granzow: “Motorcycle tanks, when flipped, have the required U-shape for whistling vessels, an instrument inspired by ancient Andean ceramics. In this version, 3D printed fipple-flutes sing as the air pressure changes in the rocking tank.”

These are motorized via Arduino, so each tank rocks back and forth slowly in its own rhythm. As the water shifts back and forth from one side of the “U” to the other, air is sucked in through the flutes and pushed out on the other side, creating mournful whistling sounds.

music13

music12

Tapewarp, by Bryan Day, is a simple, yet very satisfying, instrument made of amplified measuring tape of differing lengths.  Each tape is in contact with a piezo sensor affixed at the base, which connects to an amplifier. He told me that this project was born as an accidental discovery while he was busy exploring the sonic properties of the helping hands tool.

music6

This invented instrument by Bart Hopkin is made up of a menagerie of metal and wooden parts, each struck in time by the player and bouncing, vibrating, and warbling at their own individual frequency.
music1

music2

The Interactive Mechanical Drum Machine, by Tim Phillips, is visually arresting in its simplicity, and equally enjoyable to play with. Users are invited to interact with the various wooden cogs, adding and removing binder clips at different intervals. As the cogs rotate, the clips lift and then drop a drumstick, which bounces to sound on a nearby drum. Participants had a fun visual interface with which to experiment with different rhythms.

music7

The amplified bicycle wheel, a pet project by Myles Borins, was fun to play with an assortment of hand tools and other everyday objects.

music8

Casey Rodarmor brought his Rodadoor, a flexible drum pad made of silicone rubber embedded with conductive fabric. To accompany the pad, Casey created a touch-sensor glove; each finger on the glove correlates to one note, and each separate square on the pad to a different octave.

music9

Ashley Bellouin presents her take on one of Benjamin Franklin’s inventions with her Glass Armonica, below. The armonica is made of thirteen glass bowls of different diameters and pitches, rotated around a central rod, and then touched with a moistened finger, similar to the “singing wine glass” trick. The drone-like sounds in the background are from Ashley’s harmonium, a hand-pumped reed instrument.

music10

8 thoughts on “Sound Makers Unite at Stanford

  1. chuck says:

    Bart Hopkin is awesome! His book Musical Instrument Design is full of useful information and ideas for the instrument maker. This is the kind of thing I come here to see. Thanks!
    BTW- how about a follow up with some video?

    1. Gillian BenAry says:

      Hi Chuck,
      I included the two videos I took– there was (understandably) a lot of ambient noise all day, or I would have taken more!
      Thanks for reading!

      1. chuck says:

        Oh duh- I didn’t see a play button so I didn’t recognize those as videos. I wish we had events like this in my area. As an instrument maker I’d really appreciate the cross pollination of ideas.

  2. gwenkuo says:

    Interesting post of kids in sound art! Sharing with you poetic sound art from Asian woman.. http://wp.me/p3bwN9-2b

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK