Located inside Metrix Create:Space at the heart of Seattle, Metrix Open Hardware Lab features a pick-and-place machine and a reflow soldering line for manufacturing open source electronics. Its first product, the Brainwave, purports to be the cheapest all-in-one 3D printer control board solution on the market.
“I’ve wanted to design my own 3D printer electronics for some time,” writes designer Matthew Wilson (aka unrepentantgeek), “but it wasn’t until I found myself building machines where 50% of the cost was in the electronics that I really threw myself into it.”
Brainwave 1.0 supports single-extruder Cartesian and delta-style printer designs, and is designed to be easily patched and repaired. More details are available on Thingiverse, and at the MOHL storefront, linked below.
Brainwave Reprap Controller | Metrix.NET, Open Hardware Lab
MAKE Volume 34: Join the robot uprising! As MAKE's Volume 34 makes clear, there’s never been a better time to delve into robotics, whether you’re a tinkerer or a more serious explorer. With the powerful tools and expertise now available, the next great leap in robot evolution is just as likely to come from your garage as a research lab. The current issue of MAKE will get you started. Explore robot prototyping systems, ride along with the inventors of the OpenROV submersible, and learn how you can 3D-print your own cutting-edge humanoid robot for half the price. Plus, build a coffee-can Arduino robot, a lip balm linear actuator, a smartphone servo controller, and much more
On newsstands now, by subscription, or available in the Maker Shed
8 thoughts on “Metrix Open Hardware Lab’s Brainwave RepRap Controller”
Comments are closed.
ADVERTISEMENT
Join Make: Community Today
Respectully, Why would someone pursue these electronics without including some “future friendly” features like, LCD or SD?
I know you can always replace the cpu, but that’s not nearly as PnP.
Adding these features cost money. The LCD and SD Card features would double the cost of the controller board. Besides, we just add a $35 raspberry pi to the robots and control them over ethernet; much more usable than a 4 line LCD…
exactly. and once you have a pi, you can run botqueue (shameless plug) and then control your 3d printers using your smartphone, computer, or tablet. whats better, the best interfaces modern engineering can make, or a lcd screen from the 80s? ;)
LCD screen from the 80’s :)
Or preferably a nixie tubes or a green-on-black CRT