Make a Differential Light Meter With an Op Amp

FSIPSFWHET1B8BJ.LARGE

Instructables user SarahandDillon made a differential light meter with a TL082 op amp; it compares the readings of two photo sensors.

Makezine_COTM_OpAmp-BadgeThis works in the exact same way as the improved transimpedance amplifier, except that the current flowing out of Vout, through the resistor/capacitor barrier, to V- is now the sum of the two photodiode currents. Furthermore, the photodiode currents are flowing in different directions, since one is reverse biased with -15V and the other is reverse biased with +15 volts (the electrons are repelled away from the -15V and attracted towards the +15V).

If the -15V diode’s current is Iminus(t) and the +15V diode’s current is Iplus(t), then the total (positive) current flowing out of Vout through the barrier is Iminus(t) – Iplus(t). So Vout is now measuring the difference between the two currents, and thus it’s measuring the difference between the intensity of light into one diode versus the other!

If you bend the two diodes so that they point in opposite directions, you now have a device that measure the difference between the intensity of light on one side versus the intensity of light on the other. A differential light meter.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!

My interests include writing, electronics, RPGs, scifi, hackers & hackerspaces, 3D printing, building sets & toys. @johnbaichtal nerdage.net

View more articles by John Baichtal

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK