The Turbo Entabulator: A 3D-Printed Mechanical Computer

3D Printing & Imaging Computers & Mobile
The Turbo Entabulator: A 3D-Printed Mechanical Computer

punchcard

Chris Fenton’s 3D-printed mechanical computer (mentioned previously on MAKE) looks super cool!

punch card reader. Two hooks assigned to each counter can be used to either increment or decrement the register (if you accidentally select both at the same time, the machine will jam up until something snaps!). A spring-loaded lever attached to each counter gets raised whenever that counter is reading ‘zero.’ An extra hook is used for each counter to selectively pull down this lever, so that it gets ignored. A ‘zero-detect’ shaft runs the length of the machine, and gets rotated 30 degrees or so whenever a zero-detect lever gets triggered. This in-turn rotates a pulley attached to the end of the shaft, which pulls on a string, which lifts a ‘catch’ mechanism to rotate the ‘cylinder’ of the punch card reader and advance to the next instruction! Tadaa! A computer!

You can download Chris’s work from Thingiverse, or view the computer in action at NYC Resistor’s upcoming Interactive Show.

cardreader

Discuss this article with the rest of the community on our Discord server!

My interests include writing, electronics, RPGs, scifi, hackers & hackerspaces, 3D printing, building sets & toys. @johnbaichtal nerdage.net

View more articles by John Baichtal

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK