Super-Capacitor Flashlight

Technology
Super-Capacitor Flashlight
YouTube player

Makezine_COTM_Capacitor-BadgePatrick AKA EngineeringShock built a flashlight that uses no batteries, and instead charges up a bunch of caps from a wall wart.

Unfortunately, super capacitors can only be charged to lower voltages; typically around 2.5v or 2.7v as a standard. If you place some super capacitors in series, you can charge to higher voltages, but you lose a tremendous amount of capacitance. When you plug this device into a wall transformer (I designed this device around a 9v@1A transformer), the on-board microprocessor turns on a relay that connects power to the capacitor bank. The series super capacitors then charge to 5.2v through the relay contacts. The capacitors an be interchanged to use higher or lower values, depending on how much you want to spend. The voltage on the capacitor bank is constantly being sampled by an ADC (Analog to Digital Converter) that is embedded in the microprocessor. When the voltage exceeds a value of roughly 5.2v, a flag trips in software, and the MCU turns off the charging relay, at which point the green LED indicator will start and continue to blink as an indicator to show the user that the caps are charged. You can leave this device plugged in for as long as you want, and the caps will be very much safe and sound.

FP85U9VGVP28ZTL.LARGE

11 thoughts on “Super-Capacitor Flashlight

  1. Michael says:

    I really like it bit how long does it last?

  2. Scott_Tx says:

    I’d make a dock for that sucker. drop it in when not in use since it wont hurt the caps for anytime charging.

  3. funny8767 says:

    so what if you lose a bunch of capacitance… the energy stored is the same.

    1. Dax says:

      Indeed. The energy stored in a capacitor is in the square of its voltage, which is why the capacitance halves when you put two capacitors in series to double the voltage.

      Otherwise you could make a device that switches capacitors between series and parallel and makes energy out of nothing.

  4. adcurtin says:

    I like this a bit, but 20 minute charge time isn’t all that awesome, especially since they’re caps.

    I think I might do something like this, but instead use a much much beefier power supply (probably a PC or xbox 360 power supply) to hopefully get charge time down to a minute or two.

  5. Bfaulkner says:

    Why not use the switch built into the housing? I see your build with it’s own switch, but why not use the already there switch?

    1. Scott_Tx says:

      I wondered about that also

  6. Engiinedw says:

    50F * 2.7V *2ea =5.2V 50F.
    I think holding flash light on time is very short.
    about 1minute.
    I’snt right?

  7. joe says:

    how long does it last, im going on a camping trip soon, so I just want to know whether to waste time with it or not.

  8. Jens Gadegaard Andersen says:

    I think the concept is very cool, but I’m not sure how practical it is with the charge time. Maybe you could do something to lower this.

  9. Stephen Roberts says:

    Thank you for your informative video. I really enjoyed your video. The convenient resistor kits are good for perf boards

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

My interests include writing, electronics, RPGs, scifi, hackers & hackerspaces, 3D printing, building sets & toys. @johnbaichtal nerdage.net

View more articles by John Baichtal

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK