Following in the footsteps of the original Paperduino—and the Paperduino Leonardo—is the Paperduino Tiny. It’s a cheap Arduino-compatible board based around the ATtiny85 micro-controller, and you can probably put it together for around US$4. The difference? As you might have guessed from the name, it’s made of paper.
More information can be found on the Paperduino Wiki—including step-by-step instructions, and a full parts list.
Specifications
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source – 5V
- Built-in USB (and serial debugging)
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)
- 8k Flash Memory (about 6k after bootloader)
- I2C and SPI (vis USI)
- PWM on 3 pins (more possible with Software PWM)
- ADC on 4 pins
- Power LED and Test/Status LED (on Pin1)
(via Instructables)
18 thoughts on “Building an Arduino out of Paper”
Comments are closed.
ADVERTISEMENT
Join Make: Community Today
[…] Read more on MAKE […]
[…] https://makezine.com/2014/04/04/building-an-arduino-out-of-paper/?utm_source=feedburner&utm_mediu… […]
Reblogged this on Made in Italy News.
[…] Read more on MAKE […]
[…] 페이퍼듀이노(Paperduino)와 페이퍼듀이노 레오나르도(Paperduino Leonardo)의 뒤를 페이퍼듀이노 타이니(Paperduino Tiny)가 따라갑니다. 페이퍼듀이노 타이니는 Atiny85 마이크로 컨트롤러를 중심으로 제작된 저렴한 아두이노 호환 보드로, 아마 $4 정도면 모두 조립할 수 있을 것입니다. 아두이노랑 뭐가 다르냐고요? 이름에서 짐작할 수 있듯이 페이퍼듀이노는 종이로 만들어졌습니다. […]
Reblogged this on Sreejith K K.
[…] in the footsteps of the original Paperduino—and the Paperduino Leonardo—is the Paperduino Tiny. It’s a cheap Arduino-compatible board based around the ATtiny85 micro-controller, and you can […]
[…] pessoa pode construir a sua Arduino. Assim, existem uma variedade de projetos independentes como a Paperduino, uma Arduino de papel; a Severino; ou a […]
Reblogged this on Blognya Rosmianto Aji Saputro and commented:
Paperduino, Arduino yang dirakit diatas kertas, microcontroller memakai ATTiny85 8-pin. ATTiny85 ini murah, sekitar 25-35ribu rupiah, dengan 8 KB Flash memory.
Dimana ya USB Controllernya? Hmm, menurut saya USB Controller ditangani microcontroller, dengan catatan bootloader sudah di-burn ke ATTiny85. Tak yakin, masih perlu diteliti lagi.