Sintratec: Affordable Home SLS Printer Coming Soon

3D Printing & Imaging
Sintratec: Affordable Home SLS Printer Coming Soon
YouTube player

Desktop Selective Laser Sintering, or SLS, is a highly sought after item in the 3d printing world. SLS printers print by layering fine powder, then selectively “sintering” or melting it with a laser. Since there is a solid “cake” of powder, no support materials are necessary. Typically these machines are extremely expensive and quite large. Sintratec is hoping to change that.

The Sintratec team currently consists of 3 electrical engineers based out of Switzerland: Joscha Zeltner, Christian Von Burg, and Dominik Solenicki. The three hope to launch a crowdfunding campaign in October to raise enough money to ship at least 60 kit printers. Their current target price is under 3999€ ($5,277), which is considerably cheap for an SLS machine, though still quite pricey compared to your typical FDM printer. However, as you can see in the video above, they are quite different machines.

Their current prototype has a build volume of about 130mm cubed. However, it should be pointed out that the printer is still in development so the build volume might change, as well as the external look and feel.

One big way that they have kept the cost down is by going with a diode based laser. Most large SLS machines use a C02 laser that is quite large, expensive, and can be a bit dangerous since you can’t see the beam. Many safety precautions would have to be put in place. Instead, they went with a compact diode that is in the visible spectrum. While you still need to shield your eyes from the beam, you can at least tell that the beam is on!

YouTube player

If you want to follow the latest news with Sintratec, you can sign up for notifications on their website or follow along on facebook.

2 thoughts on “Sintratec: Affordable Home SLS Printer Coming Soon

  1. Mike Senese says:

    Really surprised by the results of that 13kg lift test with the chain they made. Going to research resolution details now.

  2. NeoIvan PuntoCom says:

    My project on Indiegogo! Low cost PET filament for 3d printing! the same

    material used on plastic bottles!

    http://igg.me/at/petfilament/x/7421134

    BUY PET FILAMENT SPOOL 1 KG = $15

    – PET FILAMENT SPOOL(s) 2 KG = $25, worldwide shipping included!!!

    Mi proyecto en indiegogo, Filamento PET para impresion 3d, el mismo

    plastico usado en botellas, desde 15$ el kilogramo, envio internacional

    incluido. Mas informacion en http://igg.me/at/petfilament/x/7421134

  3. Jim says:

    I am curious if this will be Open Source?

  4. solidusline says:

    Now I’m wonder if this has a heated build chamber and inert gas purge system. Sintering is a notoriously difficult process because it scales with T^4, meaning the slightest temperature difference can mess things up quite a bit.

    Though they may just be using black wax so may not need that. The use of a laser diode is a nice choice though, CO2 lasers have stability issues that makes them a pain to work with.

    1. Jim says:

      It is my understanding of the tech that a heated material bed is mandatory. The material is held just below transition temp and the laser bumps it over.

      1. solidusline says:

        That is indeed the case, but one does not need a heated bed if one has a powerful enough laser compared to the material in question, or if one has a way to deal with curl.

        One can run a typical industrial laser sintering machine without a heated bed if one takes measures to take care of curl

  5. hingedthinker says:

    Reblogged this on Blogagility and commented:
    getting cheaper…

  6. Brian Newnan says:

    https://www.indiegogo.com/projects/sintratec-world-s-first-desktop-laser-sinterer/x/9164191
    See the above link to see Sintratec SLS machine. Need to buy one right away. Only 8 left at the introductory pricing. All of the makexyz community should see this machine. Brian Newnan

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

I get ridiculously excited seeing people make things. I just want to revel in the creativity I see in makers. My favorite thing in the world is sharing a maker's story. find me at CalebKraft.com

View more articles by Caleb Kraft

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK