Weekend Project Instructions – Rodent Powered Nightlight

Weekend Project Instructions – Rodent Powered Nightlight

Make sure to download the PDF for this project and print it out to look at as you make this project. Also make sure to watch the video that goes along with these instructions!

To begin, I needed a rodent wheel. I chose the mouse wheel, because when I visited the pet store, the mice were running on the wheel while all the other rodents were busy sleeping.

Mouse1

Then I affixed magnets to the side of it. After significant trial and error, I used a shower drain that turned out to be the perfect size and affixed them with superglue. This is trickier than it seems because the magnets are powerful. Be careful because these magnets can pinch your fingers. I used 1/2″ Neodymium magnets from Amazing Magnets. but in retrospect, the 3/4″ magnets recommended in the article might provide more power. Once the magnets were on the drain-plate, I attached the drain-plate to the side of the wheel with more superglue and zipties.

Mouse2

I used sewing bobbins to wind my coils and they worked great. Once you get a coil all wound up, give it a coat of superglue to make it behave. I made 6 coils and went through three containers of superglue and two rolls of 30 gauge magnet wire on this project, so make sure to stock up!

I re-used the structural wire-rods being used as a base for the axle. I used a hot-glue gun to hold the coils in place. I used a bit of 2×4 left over from the workbench I made two weekends ago.

Now that I’m done with it, I want to add a bicycle computer to see how far Annika runs in a day and track her progress. I’m also planning on adding some ball bearings to make the wheel quieter. I tried adding some silicon dust lube, but it didn’t help. I’d also like to learn how to make a mouse-cam and give these mice a home on the web!

10 thoughts on “Weekend Project Instructions – Rodent Powered Nightlight

  1. kae_verens says:

    you know, for years, I’ve had an idea based on something like this – you get a few hamsters, and separate them into different cages, each with a wheel generating electricity, with a switch measuring how many revolutions the wheels make.

    feed the hamsters /exactly/ the same amount each. no hamster should get more than any other.

    every few months, you examine the numbers to see which hamsters are the more energetic.

    breed the more energetic ones.

    after some years, you have a race of super-hamsters, who will power your house in return for a small amount of hamster food.

    Kae

  2. screaminscott says:

    I wonder if you could use the same thing with those spinning pinwheel yard decorations? Maybe use them to charge a battery to power low voltage landscape lighting? An advantage is that the wind also blows at night.

  3. screaminscott says:

    I wonder if you could use the same thing with those spinning pinwheel yard decorations? Maybe use them to charge a battery to power low voltage landscape lighting? An advantage is that the wind also blows at night.

  4. sloober says:

    Did you add weight to the other side of the wheel opposite the magnets?
    If not and the wheel is not balanced, it will be very difficult for the mouse to keep it at a contant speed.
    Use some lead stick on weights.
    John

  5. Dave Zulueta says:

    Could I make a rodent powered night  light using just an ordinary magnet..?

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK