Mlarsen writes –
In this instructable I will explain how to make a simple RFID pet food access control system. This system uses a stand-alone RFID system that can be purchased either pre-assembled or in kit form if you desire to do the soldering yourself, and also wish to save a few dollars in the process.
The reason I made this was out of pure necessity. I have two dogs, and when my vet placed one of them on a special diet I needed some way to ensure they ate their own food… and only their own food. Since they are open-bowl fed and I’m gone part of the day, I decided to look for a product that would do what I needed. This meant I wouldn’t have to spend a great deal of time trying to re-train them and still give them the freedom to eat whenever they chose. This is where my frustrations begun…
HOW TO – Make a RFID pet food access control system – Link.
8 thoughts on “HOW TO – Make a RFID pet food access control system”
Comments are closed.
ADVERTISEMENT
Join Make: Community Today
what would be a really cool adaptation of this project would be using the rfid chips that many pets have implanted in case they are lost.
Those tags use a proprietary protocol, and ownership of the compatible readers is restricted to vets, kennels, and the such.
I think you underestimate how much a dog is willing to go through to eat something it’s been told it shoulden’t… ;)
The RFID tags used here are probably not the same as the vet uses. You can buy RFID tags online with a reader. It may not read the pet info, but you would write your own info to the tags. Like Dog1 and Dog2.
Instead of the sound, you could use a linear actuator to cover the bowl if the unauthorized dog tried to eat it.