Further adventures in PCB-making with lasers

Technology
Further adventures in PCB-making with lasers

laserresist_pcb.jpg
From the MAKE Flickr pool

Macetech shares details on removing PCB resist with a laser cutter –

It’s easy to remove most of the residue using water and a paper towel. I used to use alcohol because it removed the residue almost instantly, but I found that it also eroded the paint mask too much. Water alone doesn’t get enough of the residue off, so you need a very mild abrasive polish. The best I’ve found for the purpose is ordinary toothpaste, although I forgot to bring it to Techshop and used some plastic polish instead. This also works fine, but it has a wax which needs to be removed with a grease-cutting soap before you attempt to etch the copper.

His test board was a revised version of the Stealth USB Capslocker project. Read on for his specific settings for the Epilog and more process pics at his blog.

More:

HOW TO – Use a laser to etch PCBs (printed circuit boards)

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK